Search Error
Lösungen
Entlastbares Druckbegrenzungsventil, magnetbetätigt

Modell

XREALANFK

Normally Open
Verstellung
  • Standard Options
  • C
    Verstellgeschützt, Werksvoreinstellung
  • L
    Standard Spindelverstellung
  • W
    Sechskantverstellung
  • Y
    Sterngriff
  • Additional Options
  • K
    Handrad
  • M
    Einstellspindel mit Kappe und Bohrungen für Drahtsicherung
  • O
    Handrad für Schalttafeleinbau
  • Q
    Mit Kappe und Drahtsicherung
Einstellbereich
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standardeinstellung
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standardeinstellung
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standardeinstellung
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standardeinstellung
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standardeinstellung
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standardeinstellung
  • Additional Options
  • F
    75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standardeinstellung
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standardeinstellung
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standardeinstellung
  • I
    15 - 1500 psi (1 - 105 bar), 1000 psi (70 bar) Standardeinstellung
  • J
    25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standardeinstellung
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standardeinstellung
  • L
    15 - 800 psi (1 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • M
    40 - 800 psi (2,8 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • O
    15 - 400 psi (1 - 28 bar), 200 psi (14 bar) Standardeinstellung
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standardeinstellung
  • R
    15 - 200 psi (1 - 14 bar), 100 psi (7 bar) Standardeinstellung
  • S
    25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standardeinstellung
  • T
    40 - 200 psi (2,8 - 14 bar), 100 psi (7 bar) Standardeinstellung
  • U
    60 - 200 psi (4 - 14 bar), 100 psi (7 bar) Standardeinstellung
  • V
    150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • Y
    30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standardeinstellung
Dichtungsmaterial
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with RVEA primary cartridge, Entlastbar , vorgesteuert, druckausgeglichener Schieber Druckbegrenzungs - Ventil)
  • U
    740 Coil-Normally Closed (with RVEA primary cartridge, Entlastbar , vorgesteuert, druckausgeglichener Schieber Druckbegrenzungs - Ventil)
  • X
    No Solenoid Valve (with RVEA primary cartridge, Entlastbar , vorgesteuert, druckausgeglichener Schieber Druckbegrenzungs - Ventil)
Port and Material Designation
  • Standard Options
  • A
    Ports 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • A/S
    Ports 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • B
    Ports 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • B/S
    Ports 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • C
    Ports 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • C/S
    Ports 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • D
    Ports 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • I
    Ports 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • I/S
    Ports 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • J
    Ports 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • J/S
    Ports 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • K
    Ports 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • K/S
    Ports 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • L
    Ports 1 & 2 — SAE 12; Port D — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Port D — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • T
    Ports 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • T/S
    Ports 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • U
    Ports 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • U/S
    Ports 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • V
    Ports 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • V/S
    Ports 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Coil
  • Standard Options
  • No Coil
  • 211
    DIN 43650 4 pin (Hirschman) 115 VAC
  • 212
    DIN 43650 4 pin (Hirschman) 12 VDC
  • 212D
    DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
  • 212LX01
    DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
  • 212LX02
    DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
  • 212X01
    DIN 43650-Form A, 12 VDC, with XMD-01 driver
  • 212X02
    DIN 43650-Form A, 12 VDC, with XMD-02 driver
  • 214
    DIN 43650-Form A, 14 VDC
  • 214D
    DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
  • 214LX01
    DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
  • 214LX02
    DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
  • 214X01
    DIN 43650-Form A, 14 VDC, with XMD-01 driver
  • 214X02
    DIN 43650-Form A, 14 VDC, with XMD-02 driver
  • 223
    DIN 43650 4 pin (Hirschman) 230 VAC
  • 224
    DIN 43650 4 pin (Hirschman) 24 VDC
  • 224D
    DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
  • 224LX01
    DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
  • 224LX02
    DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
  • 224X01
    DIN 43650-Form A, 24 VDC, with XMD-01 driver
  • 224X02
    DIN 43650-Form A, 24 VDC, with XMD-02 driver
  • 228
    DIN 43650-Form A, 28 VDC
  • 228D
    DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
  • 228LX01
    DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
  • 228LX02
    DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
  • 228X01
    DIN 43650-Form A, 28 VDC, with XMD-01 driver
  • 228X02
    DIN 43650-Form A, 28 VDC, with XMD-02 driver
  • 612
    AMP Junior Timer, 12 VDC
  • 614
    AMP Junior Timer, 14 VDC
  • 624
    AMP Junior Timer, 24 VDC
  • 628
    AMP Junior Timer, 28 VDC
  • 712
    Twin Lead 12 VDC
  • 712D
    Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
  • 714
    Twin Lead, 14 VDC
  • 724
    Twin Lead 24 VDC
  • 724D
    Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
  • 728
    Twin Lead, 28 VDC
  • 812
    Metri-Pack, 12 VDC
  • 814
    Metri-Pack, 14 VDC
  • 824
    Metri-Pack, 24 VDC
  • 828
    Metri-Pack, 28 VDC
  • 912
    Deutsch DT04-2P, 12 VDC
  • 912D
    Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
  • 912LX01
    Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
  • 912LX02
    Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
  • 912X01
    Deutsch DT04-2P, 12 VDC, with XMD-01 driver
  • 912X02
    Deutsch DT04-2P, 12 VDC, with XMD-02 driver
  • 914
    Deutsch DT04-2P, 14 VDC
  • 914D
    Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
  • 914LX01
    Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
  • 914LX02
    Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
  • 914X01
    Deutsch DT04-2P, 14 VDC, with XMD-01 driver
  • 914X02
    Deutsch DT04-2P, 14 VDC, with XMD-02 driver
  • 924
    Deutsch DT04-2P, 24 VDC
  • 924D
    Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
  • 924LX01
    Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
  • 924LX02
    Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
  • 924X01
    Deutsch DT04-2P, 24 VDC, with XMD-01 driver
  • 924X02
    Deutsch DT04-2P, 24 VDC, with XMD-02 driver
  • 928
    Deutsch DT04-2P, 28 VDC
  • 928D
    Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
  • 928LX01
    Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
  • 928LX02
    Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
  • 928X01
    Deutsch DT04-2P, 28 VDC, with XMD-01 driver
  • 928X02
    Deutsch DT04-2P, 28 VDC, with XMD-02 driver

Model: XREA

Magnetbetätigt, entlastbare Druckbegrenzung Baugruppe

Capacity:

Modell

XREALANFK

Normally Open
Verstellung
  • Standard Options
  • C
    Verstellgeschützt, Werksvoreinstellung
  • L
    Standard Spindelverstellung
  • W
    Sechskantverstellung
  • Y
    Sterngriff
  • Additional Options
  • K
    Handrad
  • M
    Einstellspindel mit Kappe und Bohrungen für Drahtsicherung
  • O
    Handrad für Schalttafeleinbau
  • Q
    Mit Kappe und Drahtsicherung
Einstellbereich
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standardeinstellung
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standardeinstellung
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standardeinstellung
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standardeinstellung
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standardeinstellung
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standardeinstellung
  • Additional Options
  • F
    75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standardeinstellung
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standardeinstellung
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standardeinstellung
  • I
    15 - 1500 psi (1 - 105 bar), 1000 psi (70 bar) Standardeinstellung
  • J
    25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standardeinstellung
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standardeinstellung
  • L
    15 - 800 psi (1 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • M
    40 - 800 psi (2,8 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • O
    15 - 400 psi (1 - 28 bar), 200 psi (14 bar) Standardeinstellung
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standardeinstellung
  • R
    15 - 200 psi (1 - 14 bar), 100 psi (7 bar) Standardeinstellung
  • S
    25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standardeinstellung
  • T
    40 - 200 psi (2,8 - 14 bar), 100 psi (7 bar) Standardeinstellung
  • U
    60 - 200 psi (4 - 14 bar), 100 psi (7 bar) Standardeinstellung
  • V
    150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standardeinstellung
  • Y
    30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standardeinstellung
Dichtungsmaterial
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with RVEA primary cartridge, Entlastbar , vorgesteuert, druckausgeglichener Schieber Druckbegrenzungs - Ventil)
  • U
    740 Coil-Normally Closed (with RVEA primary cartridge, Entlastbar , vorgesteuert, druckausgeglichener Schieber Druckbegrenzungs - Ventil)
  • X
    No Solenoid Valve (with RVEA primary cartridge, Entlastbar , vorgesteuert, druckausgeglichener Schieber Druckbegrenzungs - Ventil)
Port and Material Designation
  • Standard Options
  • A
    Ports 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • A/S
    Ports 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • B
    Ports 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • B/S
    Ports 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • C
    Ports 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • C/S
    Ports 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • D
    Ports 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • I
    Ports 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • I/S
    Ports 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • J
    Ports 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • J/S
    Ports 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • K
    Ports 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • K/S
    Ports 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • L
    Ports 1 & 2 — SAE 12; Port D — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Port D — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • T
    Ports 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • T/S
    Ports 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • U
    Ports 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • U/S
    Ports 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • V
    Ports 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • V/S
    Ports 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Coil
  • Standard Options
  • No Coil
  • 211
    DIN 43650 4 pin (Hirschman) 115 VAC
  • 212
    DIN 43650 4 pin (Hirschman) 12 VDC
  • 212D
    DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
  • 212LX01
    DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
  • 212LX02
    DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
  • 212X01
    DIN 43650-Form A, 12 VDC, with XMD-01 driver
  • 212X02
    DIN 43650-Form A, 12 VDC, with XMD-02 driver
  • 214
    DIN 43650-Form A, 14 VDC
  • 214D
    DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
  • 214LX01
    DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
  • 214LX02
    DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
  • 214X01
    DIN 43650-Form A, 14 VDC, with XMD-01 driver
  • 214X02
    DIN 43650-Form A, 14 VDC, with XMD-02 driver
  • 223
    DIN 43650 4 pin (Hirschman) 230 VAC
  • 224
    DIN 43650 4 pin (Hirschman) 24 VDC
  • 224D
    DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
  • 224LX01
    DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
  • 224LX02
    DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
  • 224X01
    DIN 43650-Form A, 24 VDC, with XMD-01 driver
  • 224X02
    DIN 43650-Form A, 24 VDC, with XMD-02 driver
  • 228
    DIN 43650-Form A, 28 VDC
  • 228D
    DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
  • 228LX01
    DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
  • 228LX02
    DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
  • 228X01
    DIN 43650-Form A, 28 VDC, with XMD-01 driver
  • 228X02
    DIN 43650-Form A, 28 VDC, with XMD-02 driver
  • 612
    AMP Junior Timer, 12 VDC
  • 614
    AMP Junior Timer, 14 VDC
  • 624
    AMP Junior Timer, 24 VDC
  • 628
    AMP Junior Timer, 28 VDC
  • 712
    Twin Lead 12 VDC
  • 712D
    Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
  • 714
    Twin Lead, 14 VDC
  • 724
    Twin Lead 24 VDC
  • 724D
    Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
  • 728
    Twin Lead, 28 VDC
  • 812
    Metri-Pack, 12 VDC
  • 814
    Metri-Pack, 14 VDC
  • 824
    Metri-Pack, 24 VDC
  • 828
    Metri-Pack, 28 VDC
  • 912
    Deutsch DT04-2P, 12 VDC
  • 912D
    Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
  • 912LX01
    Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
  • 912LX02
    Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
  • 912X01
    Deutsch DT04-2P, 12 VDC, with XMD-01 driver
  • 912X02
    Deutsch DT04-2P, 12 VDC, with XMD-02 driver
  • 914
    Deutsch DT04-2P, 14 VDC
  • 914D
    Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
  • 914LX01
    Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
  • 914LX02
    Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
  • 914X01
    Deutsch DT04-2P, 14 VDC, with XMD-01 driver
  • 914X02
    Deutsch DT04-2P, 14 VDC, with XMD-02 driver
  • 924
    Deutsch DT04-2P, 24 VDC
  • 924D
    Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
  • 924LX01
    Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
  • 924LX02
    Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
  • 924X01
    Deutsch DT04-2P, 24 VDC, with XMD-01 driver
  • 924X02
    Deutsch DT04-2P, 24 VDC, with XMD-02 driver
  • 928
    Deutsch DT04-2P, 28 VDC
  • 928D
    Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
  • 928LX01
    Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
  • 928LX02
    Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
  • 928X01
    Deutsch DT04-2P, 28 VDC, with XMD-01 driver
  • 928X02
    Deutsch DT04-2P, 28 VDC, with XMD-02 driver
Funktion
Normally Open
Function image

Technische Daten

  • Modifiers
    Ports
    • A, A/S
      Ports 1 & 2: 1/4" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • B, B/S
      Ports 1 & 2: 3/8" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • C, C/S
      Ports 1 & 2: 1/2" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • D, D/S
      Ports 1 & 2: 3/4" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • I, I/S
      Ports 1 & 2: SAE 6; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • J, J/S
      Ports 1 & 2: SAE 8; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • K, K/S
      Ports 1 & 2: SAE 10; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • L, L/S
      Ports 1 & 2: SAE 12; Port D: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • T, T/S
      Ports 1 & 2: 1/4" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • U, U/S
      Ports 1 & 2: 3/8" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • V, V/S
      Ports 1 & 2: 1/2" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • W, W/S
      Ports 1 & 2: 3/4" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    Back to Top

    Diese Baugruppe bietet zwei Funktionen. Zum einen Druckbegrenzung von Anschluss 1 zum Tank (Anschluss 2), wenn die Einstellung überschritten wird. Zu anderen ermöglicht ein Magnetventil, das Druckbegrenzungsventil zu entlasten, wodurch der Druck einen minimalen Wert annimmt. Die Baugruppe ist entweder stromlos offen und erzeugt einen niedrigen Druck, bis die Spule bestromt wird oder stromlos geschlossen bei hohem Druck, bis die Spule bestromt wird.

    • Wegen Schieberleckage nicht für Lasthalteanwendungen geeignet.
    • Gegendruck in der Tankleitung (Anschluss 2) addiert sich im Verhältnis 1:1 direkt zur Ventileinstellung.
    • Ab sofort mit Magnetventilen der FLeX-Serie erhältlich. Bitte wählen Sie im Konfigurationsbereich das passende Magnetventil aus.
    Back to Top
    • Gehäusetyp
      Rohrleitungseinbau
    • Durchfluss
      30 gpm

    Model CAD Files

    Click the link of the file format you want to download.

    Back to Top
    • How big is a drop of hydraulic oil?  
    • Why doesn't Sun anodize their aluminum bodies?
    • Direct acting or pilot operated - what do I use?
      • Back to Top
    • Wichtig: Beachten Sie bitte sorgfältig die maximalen Systemdrücke, denen das Gehäuse ausgesetzt ist. Der Druckbereich ist hauptsächlich abhängig vom Gehäusematerial. Anschlussart und Anschlussgröße sind von sekundärer Bedeutung. Zum Beispiel sind Aluminiumgehäuse nur bis zu einem Systemdruck bis 210 bar zugelassen, unabhängig von Anschlussart und -größe.
    • Für detailliertere Informationen bezüglich der Ventile in dieser Zusammenstellung klicken Sie bitte auf den Modelcode im Bereich Included Components.
    Back to Top