Preferred Products
Sun’s Preferred Products are products that are more widely available than other products in the same product category. We recommend you consider applying these valves where possible as you create new designs or update existing designs.
Proceso de construcción del conjunto armado
El proceso de creación del conjunto armado de Sun le permite configurar un cartucho y un colector, o un cartucho de etapa principal y etapa piloto, y crear un conjunto digital en un espacio tridimensional. El resultado de este proceso es la página del producto del conjunto, que incluye imágenes específicas de la configuración, símbolos, información de productos y archivos CAD para descargar.
Se puede acceder al proceso de creación de conjuntos armados desde una página de producto de cartucho o colector. Solo se permiten opciones válidas.
Desde una página de colector, primero debe elegir la función de su cartucho. Una vez que elija su función, haga clic en el botón CONSTRUIR CONJUNTO ARMADO debajo del BOTÓN DÓNDE COMPRAR. Una vez que haya hecho clic, se le presentarán cartuchos válidos para su colector. Seleccione el cartucho de su elección y siga las instrucciones en la parte superior de la página. Si su combinación particular se ha generado antes, la página del conjunto resultante estará disponible de inmediato. De lo contrario, se le pedirá que ingrese su dirección de correo electrónico. Una vez que la página esté completa, se le enviará un correo electrónico con un enlace a la página del producto y del conjunto.
Desde la página de un producto de cartucho, haga clic en CONSTRUIR CONJUNTOS ARMADOS y se le presentará una lista de colectores compatibles. En el caso de los cartuchos de etapa principal y etapa piloto, puede construir un ensamblado de cartucho a cartucho o un conjunto de cartucho a colector. Una vez que haya hecho su elección, siga las instrucciones en la parte superior de la página. Si su combinación particular se ha generado antes, la página de ensamblado resultante estará disponible de inmediato. De lo contrario, se le pedirá que ingrese su dirección de correo electrónico. Una vez que la página está completa, se le enviará un correo electrónico con un enlace a la página del producto de montaje.
Tenga en cuenta que el proceso de creación de conjuntos armados es un proceso automatizado. Se puede utilizar en cualquier momento. Las páginas se generan normalmente en cuestión de minutos, pero en ocasiones se pueden esperar retrasos. En caso de retraso, un equipo de Sun trabajará para resolver el problema para garantizar que reciba su información lo más rápido posible.
Cargando
Symbols for XREA
Normally Open
Invalid Configuration
The configuration you entered is not valid. Please try another configuration of this model.
Cargando
Modelo
XREALANFK224
Normally Open
Control
L
- Standard Options
- CTamper Resistant - Factory Set
- LStandard Screw Adjustment
- WHex Wrench Adjustment
- Ymanilla de tres agarres
- Additional Options
- Kmanilla
- MCapped Screw Adjustment with Lockwire Holes
- OHandknob with Panel Mount
- QCapped and Lockwired
Adjustment Range
A
- Preferred Options
- A100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
- W150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
- Standard Options
- B50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
- C150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
- D25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
- E25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
- N60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
- Q60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
- Additional Options
- F75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standard Setting
- G60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
- H30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
- I15 - 1500 psi (1 - 105 bar), 1000 psi (70 bar) Standard Setting
- J25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting
- K75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
- L15 - 800 psi (1 - 55 bar), 400 psi (28 bar) Standard Setting
- M40 - 800 psi (2,8 - 55 bar), 400 psi (28 bar) Standard Setting
- O15 - 400 psi (1 - 28 bar), 200 psi (14 bar) Standard Setting
- P40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
- R15 - 200 psi (1 - 14 bar), 100 psi (7 bar) Standard Setting
- S25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting
- T40 - 200 psi (2,8 - 14 bar), 100 psi (7 bar) Standard Setting
- U60 - 200 psi (4 - 14 bar), 100 psi (7 bar) Standard Setting
- V150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
- Y30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standard Setting
Seal Material
N
- Standard Options
- NBuna-N
- VViton
Solenoid Designation
F
- Standard Options
- F740 Coil-Normally Open (with RVEA primary cartridge, De venteo, pilot-operated, pistón balanceado alivio válvula )
- U740 Coil-Normally Closed (with RVEA primary cartridge, De venteo, pilot-operated, pistón balanceado alivio válvula )
- XNo Solenoid Valve (with RVEA primary cartridge, De venteo, pilot-operated, pistón balanceado alivio válvula )
Port and Material Designation
K
- Standard Options
- APorts 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- A/SPorts 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- BPorts 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- B/SPorts 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- CPorts 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- C/SPorts 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- DPorts 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- D/SPorts 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- IPorts 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- I/SPorts 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- JPorts 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- J/SPorts 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- KPorts 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- K/SPorts 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- LPorts 1 & 2 — SAE 12; Port D — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- L/SPorts 1 & 2 — SAE 12; Port D — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- TPorts 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
- T/SPorts 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
- UPorts 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
- U/SPorts 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
- VPorts 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
- V/SPorts 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
- WPorts 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
- W/SPorts 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Coil
224
- Standard Options
- No coil
- 211DIN 43650 4 pin (Hirschman) 115 VAC
- 212DIN 43650 4 pin (Hirschman) 12 VDC
- 212DDIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
- 212LX01DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
- 212LX02DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
- 212X01DIN 43650-Form A, 12 VDC, with XMD-01 driver
- 212X02DIN 43650-Form A, 12 VDC, with XMD-02 driver
- 214DIN 43650-Form A, 14 VDC
- 214DDIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
- 214LX01DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
- 214LX02DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
- 214X01DIN 43650-Form A, 14 VDC, with XMD-01 driver
- 214X02DIN 43650-Form A, 14 VDC, with XMD-02 driver
- 223DIN 43650 4 pin (Hirschman) 230 VAC
- 224DIN 43650 4 pin (Hirschman) 24 VDC
- 224DDIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
- 224LX01DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
- 224LX02DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
- 224X01DIN 43650-Form A, 24 VDC, with XMD-01 driver
- 224X02DIN 43650-Form A, 24 VDC, with XMD-02 driver
- 228DIN 43650-Form A, 28 VDC
- 228DDIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
- 228LX01DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
- 228LX02DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
- 228X01DIN 43650-Form A, 28 VDC, with XMD-01 driver
- 228X02DIN 43650-Form A, 28 VDC, with XMD-02 driver
- 612AMP Junior Timer, 12 VDC
- 614AMP Junior Timer, 14 VDC
- 624AMP Junior Timer, 24 VDC
- 628AMP Junior Timer, 28 VDC
- 712Twin Lead 12 VDC
- 712DTwin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
- 714Twin Lead, 14 VDC
- 724Twin Lead 24 VDC
- 724DTwin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
- 728Twin Lead, 28 VDC
- 812Metri-Pack, 12 VDC
- 814Metri-Pack, 14 VDC
- 824Metri-Pack, 24 VDC
- 828Metri-Pack, 28 VDC
- 912Deutsch DT04-2P, 12 VDC
- 912DDeutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
- 912LX01Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
- 912LX02Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
- 912X01Deutsch DT04-2P, 12 VDC, with XMD-01 driver
- 912X02Deutsch DT04-2P, 12 VDC, with XMD-02 driver
- 914Deutsch DT04-2P, 14 VDC
- 914DDeutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
- 914LX01Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
- 914LX02Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
- 914X01Deutsch DT04-2P, 14 VDC, with XMD-01 driver
- 914X02Deutsch DT04-2P, 14 VDC, with XMD-02 driver
- 924Deutsch DT04-2P, 24 VDC
- 924DDeutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
- 924LX01Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
- 924LX02Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
- 924X01Deutsch DT04-2P, 24 VDC, with XMD-01 driver
- 924X02Deutsch DT04-2P, 24 VDC, with XMD-02 driver
- 928Deutsch DT04-2P, 28 VDC
- 928DDeutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
- 928LX01Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
- 928LX02Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
- 928X01Deutsch DT04-2P, 28 VDC, with XMD-01 driver
- 928X02Deutsch DT04-2P, 28 VDC, with XMD-02 driver
Find compatible models
Please select either "Cartridge to Cartridge" or "Cartridge to Manifold" to find compatible models.
Model: XREA
Alivio con descarga operado por solenoide ensamblaje
Capacity:
Cargando
Modelo
XREALANFK224
Normally Open
Control
L
- Standard Options
- CTamper Resistant - Factory Set
- LStandard Screw Adjustment
- WHex Wrench Adjustment
- Ymanilla de tres agarres
- Additional Options
- Kmanilla
- MCapped Screw Adjustment with Lockwire Holes
- OHandknob with Panel Mount
- QCapped and Lockwired
Adjustment Range
A
- Preferred Options
- A100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
- W150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
- Standard Options
- B50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
- C150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
- D25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
- E25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
- N60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
- Q60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
- Additional Options
- F75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standard Setting
- G60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
- H30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
- I15 - 1500 psi (1 - 105 bar), 1000 psi (70 bar) Standard Setting
- J25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting
- K75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
- L15 - 800 psi (1 - 55 bar), 400 psi (28 bar) Standard Setting
- M40 - 800 psi (2,8 - 55 bar), 400 psi (28 bar) Standard Setting
- O15 - 400 psi (1 - 28 bar), 200 psi (14 bar) Standard Setting
- P40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
- R15 - 200 psi (1 - 14 bar), 100 psi (7 bar) Standard Setting
- S25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting
- T40 - 200 psi (2,8 - 14 bar), 100 psi (7 bar) Standard Setting
- U60 - 200 psi (4 - 14 bar), 100 psi (7 bar) Standard Setting
- V150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
- Y30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standard Setting
Seal Material
N
- Standard Options
- NBuna-N
- VViton
Solenoid Designation
F
- Standard Options
- F740 Coil-Normally Open (with RVEA primary cartridge, De venteo, pilot-operated, pistón balanceado alivio válvula )
- U740 Coil-Normally Closed (with RVEA primary cartridge, De venteo, pilot-operated, pistón balanceado alivio válvula )
- XNo Solenoid Valve (with RVEA primary cartridge, De venteo, pilot-operated, pistón balanceado alivio válvula )
Port and Material Designation
K
- Standard Options
- APorts 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- A/SPorts 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- BPorts 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- B/SPorts 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- CPorts 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- C/SPorts 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- DPorts 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- D/SPorts 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- IPorts 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- I/SPorts 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- JPorts 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- J/SPorts 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- KPorts 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- K/SPorts 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- LPorts 1 & 2 — SAE 12; Port D — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
- L/SPorts 1 & 2 — SAE 12; Port D — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
- TPorts 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
- T/SPorts 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
- UPorts 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
- U/SPorts 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
- VPorts 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
- V/SPorts 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
- WPorts 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
- W/SPorts 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Coil
224
- Standard Options
- No coil
- 211DIN 43650 4 pin (Hirschman) 115 VAC
- 212DIN 43650 4 pin (Hirschman) 12 VDC
- 212DDIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
- 212LX01DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
- 212LX02DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
- 212X01DIN 43650-Form A, 12 VDC, with XMD-01 driver
- 212X02DIN 43650-Form A, 12 VDC, with XMD-02 driver
- 214DIN 43650-Form A, 14 VDC
- 214DDIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
- 214LX01DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
- 214LX02DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
- 214X01DIN 43650-Form A, 14 VDC, with XMD-01 driver
- 214X02DIN 43650-Form A, 14 VDC, with XMD-02 driver
- 223DIN 43650 4 pin (Hirschman) 230 VAC
- 224DIN 43650 4 pin (Hirschman) 24 VDC
- 224DDIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
- 224LX01DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
- 224LX02DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
- 224X01DIN 43650-Form A, 24 VDC, with XMD-01 driver
- 224X02DIN 43650-Form A, 24 VDC, with XMD-02 driver
- 228DIN 43650-Form A, 28 VDC
- 228DDIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
- 228LX01DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
- 228LX02DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
- 228X01DIN 43650-Form A, 28 VDC, with XMD-01 driver
- 228X02DIN 43650-Form A, 28 VDC, with XMD-02 driver
- 612AMP Junior Timer, 12 VDC
- 614AMP Junior Timer, 14 VDC
- 624AMP Junior Timer, 24 VDC
- 628AMP Junior Timer, 28 VDC
- 712Twin Lead 12 VDC
- 712DTwin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
- 714Twin Lead, 14 VDC
- 724Twin Lead 24 VDC
- 724DTwin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
- 728Twin Lead, 28 VDC
- 812Metri-Pack, 12 VDC
- 814Metri-Pack, 14 VDC
- 824Metri-Pack, 24 VDC
- 828Metri-Pack, 28 VDC
- 912Deutsch DT04-2P, 12 VDC
- 912DDeutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
- 912LX01Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
- 912LX02Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
- 912X01Deutsch DT04-2P, 12 VDC, with XMD-01 driver
- 912X02Deutsch DT04-2P, 12 VDC, with XMD-02 driver
- 914Deutsch DT04-2P, 14 VDC
- 914DDeutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
- 914LX01Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
- 914LX02Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
- 914X01Deutsch DT04-2P, 14 VDC, with XMD-01 driver
- 914X02Deutsch DT04-2P, 14 VDC, with XMD-02 driver
- 924Deutsch DT04-2P, 24 VDC
- 924DDeutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
- 924LX01Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
- 924LX02Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
- 924X01Deutsch DT04-2P, 24 VDC, with XMD-01 driver
- 924X02Deutsch DT04-2P, 24 VDC, with XMD-02 driver
- 928Deutsch DT04-2P, 28 VDC
- 928DDeutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
- 928LX01Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
- 928LX02Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
- 928X01Deutsch DT04-2P, 28 VDC, with XMD-01 driver
- 928X02Deutsch DT04-2P, 28 VDC, with XMD-02 driver
Find compatible models
Please select either "Cartridge to Cartridge" or "Cartridge to Manifold" to find compatible models.
Función
Normally Open
Especificaciones técnicas
Modifiers
Ports
- A, A/SPorts 1 & 2: 1/4" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
- B, B/SPorts 1 & 2: 3/8" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
- C, C/SPorts 1 & 2: 1/2" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
- D, D/SPorts 1 & 2: 3/4" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
- I, I/SPorts 1 & 2: SAE 6; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
- J, J/SPorts 1 & 2: SAE 8; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
- K, K/SPorts 1 & 2: SAE 10; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
- L, L/SPorts 1 & 2: SAE 12; Port D: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
- T, T/SPorts 1 & 2: 1/4" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
- U, U/SPorts 1 & 2: 3/8" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
- V, V/SPorts 1 & 2: 1/2" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
- W, W/SPorts 1 & 2: 3/4" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
- Body TypeLine mount
- Capacity30 gpm
Why doesn't Sun anodize their aluminum bodies?
How big is a drop of hydraulic oil?
Direct acting or pilot operated - what do I use?
Highlights
Consejos técnicos
Información técnica
740224
740 Series, 24 VDC high-power bobina con ISO/DIN 43650, Form A conector without TVS Diode
Características técnicas
Technical Data
- conectorISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
- Maximum Current - FLeX Valves (100% Duty Cycle at Maximum Ambient Temperature)580 mA
- Maximum Current - Non-FLeX Valves (100% Duty Cycle at Maximum Ambient Temperature)650 mA
- Resistance at 20º C23.0 ohms ±10%
- Operating Temperature Range-40 to 230 °F
- Arc Suppression (TVS)None
- Maximum Ambient Temperature122 °F
- Power Consumption (cold) - at rated voltage25 Watts
- Voltage/Frequency24 VDC
- Operating Voltage Range+10%/-15%
- Duty Cycle Rating100 %
- Solenoid Tube Diameter.62 in.
- Coil Nut Torque4.5 lbf in.
- Model Weight9.6 oz.
- PartDescriptionQuantity
Assembly build process
Are you sure you you want to clear your assembly build process?