型号

CNCEXCN

控制方式
设定范围
密封材料

Model: CNCE

液控单向阀 带旁路阻尼孔

Cavity: T-11A | Capacity:

型号

CNCEXCN

控制方式
设定范围
密封材料

技术规格

此阀为带旁路节流孔的先导液控单向阀。它具有密封导压,钢质阀座并且为非透气型。它允许液流从阀口(口2)向负载口(口1)自由流动,反向为节流。先导口(口3)的压力使阀开启从口1到口2的流道。口3需要的开启先导压力与口1的负载压力直接成正比。口2压力将直接抵抗先导压力。注意:旁路节流孔的直径由客户指定。参考下面的技术数据以便选取可行的节流孔范围。

  • 该3口先导开启单向阀和3口平衡阀结构上可以相互替换的。(对同样的规格情况下,他们是相同流量路径相同孔型)。但是请注意它们的外部尺寸可能不一样。
  • 当回路要求口间没有泄漏,可以使用这种先导完全密封的阀。
  • 客户要求的小孔直径将会在阀的某一六角面处标记。
  • 对于人工释放负载的控制,顺时针可减小负载。
  • Sun浮动式的结构可以最大限度地减少由于过大的安装扭矩以及孔型加工的误差所造成的干涉现象
  • 插孔
    T-11A
  • 系列
    1
  • 通流能力
    15 gpm
  • 最大操作压力
    5000 psi
  • 先导比
    3:1
  • 节流孔范围
    .016 - .153 in.
  • 阀头部安装六角尺寸
    7/8 in.
  • 阀安装扭矩
    30 - 35 lbf ft
  • 型号重量
    .20 lb
  • Seal kit - Cartridge
  • Seal kit - Cartridge
  • Seal kit - Cartridge

Model CAD Files

Files not yet avialable. Click below to request them.

  • What parts of the Sun cartridge valve are field serviceable?
  • I need to discharge a large accumulator. How can I increase the capacity of my discharge circuit?
  • What should I do if I need load holding on the rod of a high ratio cylinder?
  • What happens to the pilot-to-open check valve if I have back pressure in my system?
  • Other companies make high ratio PO checks. Why doesn't Sun?
  • Can I control the motion of a load with a pilot-to-open check valve?
  • How do I know how much pilot pressure is required to open a pilot-to-open check valve?
  • Where should I mount pilot-to-open check valves in my system?
  • Can I use pilot-to-open check valves with paired cylinders?
  • What about intensification?
  • How big is a drop of hydraulic oil?  
  • Vented pilot-to-open check valves are insensitive to pressure on the valve port (port 2), aren't they?
  • Should I replace the pilot-to-open check valve if my cylinder is drifting or moving?
  • Where should a vented valve be vented?
  • What is the actual pilot ratio of Sun's pilot to open check valves?
  • What ever happened to the Delrin seated valves?
  • What does pilot ratio refer to in a pilot-to-open check valve?
  • Direct acting or pilot operated - what do I use?
  • What is the difference between pilot-to-open check valves with sealed pilots compared to standard bleed through versions?
  • My load keeps drifting, and every time I take your valves out, the nose seals have been blown out of their grooves.
  • I want to use your pilot-to-open checks on air. Will they work?
  • Can I use a three-port vented pilot-to-open check valve instead of the four-port version to save on plumbing?