Loading...
Loading...

Model

DVCD8N

Control
Seal Material
Material/Coating

3-way, vent-to-operate, directional valve with internal drain to port 3 and integral T-8A control cavity (1 to 2 open, 3 blocked)

Cavity: T-2A | Capacity:

Loading...

Model

DVCD8N

Control
Seal Material
Material/Coating
See CAD Files tab below to request images.

Technical specifications

This valve is a, 3-way directional cartridge (1 to 2 open, 3 blocked) that incorporates an integral pilot control cavity. It may be used by itself or to actuate larger pilot-operated directional cartridges or logic elements. The valve shifts when there is flow through the pilot control cartridge installed in the T-8A cavity.

  • NOTE: The main stage valve should first be installed to the correct torque value followed by the T-8A pilot control section into the main stage valve to its required torque value.
  • This valve is not bistable; it is capable of modulating between the two positions shown.
  • The flow path between port 1 and port 2 is bidirectional.
  • Pressure at port 3 may oppose the opening of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
  • There must be a pressure source at port 1, relative to port 3, to shift the valve.
  • The -8 control option allows the pilot control valve to be incorporated directly into the end of the directional cartridge via the T-8A cavity. These pilot control cartridges are sold separately and include solenoid operation, air pilot operation, and hydraulic pilot operation. See Pilot Control Cartridges.
  • Leakage listed in technical data is for each path.
  • Incorporates the Sun floating-style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
  • Cavity
  • Series
  • Capacity
    15 gpm
  • Maximum Operating Pressure
    5000 psi
  • Control Pilot Flow
    10 - 15 in³/min.
  • Maximum Valve Leakage at 110 SUS (24 cSt)
    2 in³/min.@1000 psi
  • Pilot Control Cavity
    T-8A
  • Valve Hex Size
    1 1/8 in.
  • Valve Installation Torque
    45 - 50 lbf ft
  • Model Weight
    .50 lb
  • Seal kit - Cartridge
  • Seal kit - Cartridge
  • Seal kit - Cartridge

Model CAD Files

Files not yet avialable. Click below to request them.

  • What parts of the Sun cartridge valve are field serviceable?
  • How big is a drop of hydraulic oil?  
  • Direct acting or pilot operated - what do I use?
  • Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled at point of use.

Keep up with Sun