Loading...
2-way, pilot-shifted, dual path, proportional throttle with position switch
Cavity: T-52AD | Capacity:
Technical specifications
This valve is a 2-way, 2-position proportional throttle. Ports 2 and 3 are normally closed. Pilot pressure at port 1 creates a metering orifice between port 2 and 3 that is proportional to the pressure at 1. The metering passage is self-compensating. This valve uses a dual-path design. Ports 2 and 3 incorporate a double-port area. This valve incorporates a position switch to provide confirmation that the valve is closed.
- This cartridge is supplied as a sealed, factory set unit and is not field serviceable. Any tampering will violate the product warranty.
- Position switch is CE approved.
- When torquing this cartridge into its cavity, a crow's foot wrench or similar will be required since the position switch precludes the use of a deep socket wrench.
- These valves may be pressure compensated by an external, modulating, logic element. Use LR_C-XHN for a bypass circuit or LP_C-XHN for a restrictive circuit.
- The valve provides a degree of self-compensation and may be used as a flow control. To increase the accuracy of flow control, an external, modulating, logic element can be used to maintain a constant flow over a wider range of flows and pressures. See performance curves for additional information.
- Accurate pressure compensated control requires that a constant pressure differential be maintained across the valve.
- An optional protective cover, with mounting hardware included, may be ordered separately. See kit number: 991-043.
- Ports 1 and 4 should be limited to 500 psi (35 bar).
- Pressure at port 4 directly opposes pressure at port 1.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
- Cavity
- Series
- Capacity15 gpm
- Maximum Operating Pressure5000 psi
- Pilot Pressure Required to Shift Valve60 - 130 psi
- Pilot Pressure Required for Full Shift at Rated Flow290 - 340 psi
- Maximum Valve Leakage at 110 SUS (24 cSt)5 in³/min.@1000 psi
- Pilot Volume Displacement.05 in³
- Valve Hex Size1 1/8 in.
- Valve Installation Torque45 - 50 lbf ft
- Model Weight1.90 lb
- Seal kit - Cartridge
- Seal kit - Cartridge
- Supply Voltage20-30 VDC
- Operating Temperature Range-25 to 80 °C
- Vibration≥ 50g, 0-500 impulses/sec
- Shock>50 g, 1ms
- Reverse Polarity ProtectionYes
- Maximum Output Load≤ 400 mA, Duty Ratio 100%
- Short Circuit ProtectionYes, Load Short Unlimited
- Turn On Time≤ 25 ms
- Hysteresis35 %
- Thermal Shift - 0 to 80 °C ≤ ±.004 in.
- EMCDIN EN 61000-6-1/2/3/4
- ConnectorM12 X 1 (4) Pin
- Connector Environment RatingIP65
Model CAD Files
Symbol CAD Files
What parts of the Sun cartridge valve are field serviceable?
How big is a drop of hydraulic oil?
- FTCA 2-way, pilot-shifted, dual path, proportional throttle
- When installed in Sun's standard T-52A line mount manifold, plug unused ports and expect higher pressure drops.
Highlights
Technical Tips
Technical Information