Anti-Shock, pilot-operated, balanced poppet sequence valve with drain to port 3

Cavity: T-19A | Capacity:

Model

SDJTLAN

Control

Adjustment Range

Seal Material

Material/Coating

Where to buy

Technical features

Pilot-operated, anti shock sequence cartridges limit maximum system pressure and also limit the rate of pressure rise. The valve opens and then ramps closed at a constant speed, independent of settings and flows. The adjust screw determines the maximum (relief) setting and the minimum (threshold) setting. The external drain makes the valve insensitive to pressure at port 2.

Pilot flow continues to increase as the pressure at port 1 (inlet), relative to the pressure at port 3 (drain), rises above the valve setting.
Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
Will accept maximum pressure at port 2; suitable for use in cross port relief circuits.
Because the modulating occurs inside the cartridge, these valves are immune to most of the problems associated with cavitation, namely noise and manifold erosion.
Valve is relatively insensitive to varying oil temperatures and oil borne contamination.
Not suitable for use in load holding applications.
When pressure at the inlet (port 1) exceeds the threshold setting, the valve opens to tank (port 2). The pilot section moves forward at a steady rate, increasing the setting by compressing the pilot spring. Maximum setting is achieved when the pilot section reaches a mechanical stop.
The main stage orifice is protected against contamination.
Not suitable for sequencing cylinders.
Pressure settings are insensitive to back pressure at port 2.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data