Search Error
Solutions
Flow Control
Loading...
Loading...

Model

X6EDLANFA

Control
  • Preferred Options
  • L
    Standard Screw Adjustment
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • H
    Calibrated Handknob with Detent Lock
  • Y
    Tri-Grip Handknob
  • Additional Options
  • K
    Handknob
  • O
    Handknob with Panel Mount
Adjustment Range
  • Preferred Options
  • A
    .2 - 12 gpm (0,8 - 45 L/min.)
  • Standard Options
  • B
    .2 - 3 gpm (0,8 - 11 L/min.)
  • Additional Options
  • W
    .2 - 8 gpm (0,8 - 32 L/min.)
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with FDCB primary cartridge, Fully adjustable pressure compensated flow control valve with reverse flow check)
  • U
    740 Coil-Normally Closed (with FDCB primary cartridge, Fully adjustable pressure compensated flow control valve with reverse flow check)
  • X
    No Solenoid Valve (with FDCB primary cartridge, Fully adjustable pressure compensated flow control valve with reverse flow check)
Port and Material Designation
  • Standard Options
  • A
    A Aluminum
  • A/S
    A/S Iron
Model: X6ED

Solenoid-operated, rapid advance and feed flow control assembly with reverse flow check

Capacity:

Loading...

Model

X6EDLANFA

Control
  • Preferred Options
  • L
    Standard Screw Adjustment
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • H
    Calibrated Handknob with Detent Lock
  • Y
    Tri-Grip Handknob
  • Additional Options
  • K
    Handknob
  • O
    Handknob with Panel Mount
Adjustment Range
  • Preferred Options
  • A
    .2 - 12 gpm (0,8 - 45 L/min.)
  • Standard Options
  • B
    .2 - 3 gpm (0,8 - 11 L/min.)
  • Additional Options
  • W
    .2 - 8 gpm (0,8 - 32 L/min.)
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with FDCB primary cartridge, Fully adjustable pressure compensated flow control valve with reverse flow check)
  • U
    740 Coil-Normally Closed (with FDCB primary cartridge, Fully adjustable pressure compensated flow control valve with reverse flow check)
  • X
    No Solenoid Valve (with FDCB primary cartridge, Fully adjustable pressure compensated flow control valve with reverse flow check)
Port and Material Designation
  • Standard Options
  • A
    A Aluminum
  • A/S
    A/S Iron
See CAD Files tab below to request images.
Function
Meter In B Normally Open
Function image
Meter Out A Normally Open
Function image

Technical specifications

This assembly consists of a fully-adjustable, pressure-compensated flow control with reverse-flow check which provides precise flow regulation for meter-in or meter-out applications where there may be wide pressure fluctuations. It is infinitely adjustable from nearly closed up to the maximum flow. An integral high-capacity check valve provides unrestricted flow in the reverse direction. The rapid or feed rate is selected by a solenoid operated (normally open or closed) 2-way, 2-position valve.

  • The sharp-edged orifice design minimizes flow variations due to viscosity changes.
  • A balanced adjustment mechanism allows for easy adjustment even at high pressures.
  • Now available with FLeX Series solenoid valves. See CONFIGURATION section, SOLENOID DESIGNATION to specify.
Back to Top
  • Body Type
    Sandwich
  • Interface
    ISO 05 - X&Y
  • Capacity
    30 gpm
  • Body Features
    Meter in on B or meter out on A
  • Control Flow Range
    0 - 12 gpm
  • Seal Plate Included (see notes)
    No
  • Stack Height
    2.99 in.

Model CAD Files

Files not yet avialable. Click below to request them.

Back to Top
  • Why doesn't Sun anodize their aluminum bodies?
  • How big is a drop of hydraulic oil?  
  • Direct acting or pilot operated - what do I use?
    • Back to Top
  • 990120009 ISO 05 X and Y US sandwich manifold retainer and buna-N seal kit
  • 990120010 ISO 05 X and Y US sandwich manifold retainer and Viton seal kit
  • 990120011 ISO 05 X and Y Europe sandwich manifold retainer and Viton seal kit
  • 990120012 ISO 05 X and Y Europe sandwich manifold retainer and buna-N seal kit
    • Back to Top
  • Stack height value in technical data table includes seal retainer plate.
  • This installation requires a seal retainer plate and seal kit which are purchased separately. See "Related Accessories" section.
  • For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
Back to Top

Keep up with Sun