Search Error
Solutions
Solenoid Operated Cross Port Relief
Loading...
Loading...

Model

XRELLANFK224

Control
  • Preferred Options
  • L
    Standard Screw Adjustment
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • Y
    Tri-Grip Handknob
  • Additional Options
  • K
    Handknob
  • M
    Capped Screw Adjustment with Lockwire Holes
  • O
    Handknob with Panel Mount
  • Q
    Capped and Lockwired
  • W
    Hex Wrench Adjustment
Adjustment Range
  • Standard Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Additional Options
  • F
    75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
  • I
    15 - 1500 psi (1 - 105 bar), 1000 psi (70 bar) Standard Setting
  • J
    25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • L
    15 - 800 psi (1 - 55 bar), 400 psi (28 bar) Standard Setting
  • M
    40 - 800 psi (2,8 - 55 bar), 400 psi (28 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
  • O
    15 - 400 psi (1 - 28 bar), 200 psi (14 bar) Standard Setting
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
  • R
    15 - 200 psi (1 - 14 bar), 100 psi (7 bar) Standard Setting
  • S
    25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting
  • T
    40 - 200 psi (2,8 - 14 bar), 100 psi (7 bar) Standard Setting
  • U
    60 - 200 psi (4 - 14 bar), 100 psi (7 bar) Standard Setting
  • V
    150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
  • Y
    30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with RVEA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
  • U
    740 Coil-Normally Closed (with RVEA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
Port and Material Designation
  • Standard Options
  • B
    Ports 1 & 2 — 3/8" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Aluminum
  • B/S
    Ports 1 & 2 — 3/8" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Iron
  • C
    Ports 1 & 2 — 1/2" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Aluminum
  • C/S
    Ports 1 & 2 — 1/2" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Iron
  • D
    Ports 1 & 2 — 3/4" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Iron
  • E
    Ports 1 & 2 — 1" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Aluminum
  • E/S
    Ports 1 & 2 — 1" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Iron
  • I
    Ports 1 & 2 — SAE 6; Gage Ports — 1/4" NPTF; Port V — SAE 6; Aluminum
  • I/S
    Ports 1 & 2 — SAE 6; Gage Ports — 1/4" NPTF; Port V — SAE 6; Iron
  • J
    Ports 1 & 2 — SAE 8; Gage Ports — 1/4" NPTF; Port V — SAE 6; Aluminum
  • J/S
    Ports 1 & 2 — SAE 8; Gage Ports — 1/4" NPTF; Port V — SAE 6; Iron
  • K
    Ports 1 & 2 — SAE 10; Gage Ports — 1/4" NPTF; Port V — SAE 6; Aluminum
  • K/S
    Ports 1 & 2 — SAE 10; Gage Ports — 1/4" NPTF; Port V — SAE 6; Iron
  • L
    Ports 1 & 2 — SAE 12; Gage Ports — 1/4" NPTF; Port V — SAE 6; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Gage Ports — 1/4" NPTF; Port V — SAE 6; Iron
  • M
    Ports 1 & 2 — SAE 16; Gage Ports — SAE 6; Port V — SAE 6; Aluminum
  • M/S
    Ports 1 & 2 — SAE 16; Gage Ports — SAE 6; Port V — SAE 6; Iron
  • U
    Ports 1 & 2 — 3/8" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Aluminum
  • U/S
    Ports 1 & 2 — 3/8" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Iron
  • V
    Ports 1 & 2 — 1/2" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Aluminum
  • V/S
    Ports 1 & 2 — 1/2" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Iron
  • X
    Ports 1 & 2 — 1" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Aluminum
  • X/S
    Ports 1 & 2 — 1" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Iron
Coil
  • Standard Options
  • No coil
  • 211
    DIN 43650 4 pin (Hirschman) 115 VAC
  • 212
    DIN 43650 4 pin (Hirschman) 12 VDC
  • 212D
    DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
  • 212LX01
    DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
  • 212LX02
    DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
  • 212X01
    DIN 43650-Form A, 12 VDC, with XMD-01 driver
  • 212X02
    DIN 43650-Form A, 12 VDC, with XMD-02 driver
  • 214
    DIN 43650 4 pin (Hirschman) 14 VDC
  • 214D
    DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
  • 214LX01
    DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
  • 214LX02
    DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
  • 214X01
    DIN 43650-Form A, 14 VDC, with XMD-01 driver
  • 214X02
    DIN 43650-Form A, 14 VDC, with XMD-02 driver
  • 223
    DIN 43650 4 pin (Hirschman) 230 VAC
  • 224
    DIN 43650 3 pin (Hirschman) 24 VDC
  • 224D
    DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
  • 224LX01
    DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
  • 224LX02
    DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
  • 224X01
    DIN 43650-Form A, 24 VDC, with XMD-01 driver
  • 224X02
    DIN 43650-Form A, 24 VDC, with XMD-02 driver
  • 228
    DIN 43650 4 pin (Hirschman) 28 VDC
  • 228D
    DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
  • 228LX01
    DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
  • 228LX02
    DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
  • 228X01
    DIN 43650-Form A, 28 VDC, with XMD-01 driver
  • 228X02
    DIN 43650-Form A, 28 VDC, with XMD-02 driver
  • 612
    AMP Junior Timer 12 VDC
  • 614
    AMP Junior Timer 14 VDC
  • 624
    AMP Junior Timer 24 VDC
  • 628
    AMP Junior Timer, 28 VDC
  • 712
    Twin Lead 12 VDC
  • 712D
    Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
  • 714
    Twin Lead 14 VDC
  • 724
    Twin Lead 24 VDC
  • 724D
    Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
  • 728
    Twin Lead 28 VDC
  • 812
    Metri-Pack 12 VDC
  • 814
    Metri-Pack 14 VDC
  • 824
    Metri-Pack 24 VDC
  • 828
    Metri-Pack, 28 VDC
  • 912
    Deutsch DT04-2P 12 VDC
  • 912D
    Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
  • 912LX01
    Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
  • 912LX02
    Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
  • 912X01
    Deutsch DT04-2P, 12 VDC, with XMD-01 driver
  • 912X02
    Deutsch DT04-2P, 12 VDC, with XMD-02 driver
  • 914
    Deutsch DT04-2P 14 VDC
  • 914D
    Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
  • 914LX01
    Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
  • 914LX02
    Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
  • 914X01
    Deutsch DT04-2P, 14 VDC, with XMD-01 driver
  • 914X02
    Deutsch DT04-2P, 14 VDC, with XMD-02 driver
  • 924
    Deutsch DT04-2P 24 VDC
  • 924D
    Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
  • 924LX01
    Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
  • 924LX02
    Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
  • 924X01
    Deutsch DT04-2P, 24 VDC, with XMD-01 driver
  • 924X02
    Deutsch DT04-2P, 24 VDC, with XMD-02 driver
  • 928
    Deutsch DT04-2P 28 VDC
  • 928D
    Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
  • 928LX01
    Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
  • 928LX02
    Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
  • 928X01
    Deutsch DT04-2P, 28 VDC, with XMD-01 driver
  • 928X02
    Deutsch DT04-2P, 28 VDC, with XMD-02 driver
Model: XREL

Solenoid operated cross port relief assembly

Capacity:

Loading...

Model

XRELLANFK224

Control
  • Preferred Options
  • L
    Standard Screw Adjustment
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • Y
    Tri-Grip Handknob
  • Additional Options
  • K
    Handknob
  • M
    Capped Screw Adjustment with Lockwire Holes
  • O
    Handknob with Panel Mount
  • Q
    Capped and Lockwired
  • W
    Hex Wrench Adjustment
Adjustment Range
  • Standard Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Additional Options
  • F
    75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
  • I
    15 - 1500 psi (1 - 105 bar), 1000 psi (70 bar) Standard Setting
  • J
    25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • L
    15 - 800 psi (1 - 55 bar), 400 psi (28 bar) Standard Setting
  • M
    40 - 800 psi (2,8 - 55 bar), 400 psi (28 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
  • O
    15 - 400 psi (1 - 28 bar), 200 psi (14 bar) Standard Setting
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
  • R
    15 - 200 psi (1 - 14 bar), 100 psi (7 bar) Standard Setting
  • S
    25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting
  • T
    40 - 200 psi (2,8 - 14 bar), 100 psi (7 bar) Standard Setting
  • U
    60 - 200 psi (4 - 14 bar), 100 psi (7 bar) Standard Setting
  • V
    150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
  • Y
    30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with RVEA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
  • U
    740 Coil-Normally Closed (with RVEA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
Port and Material Designation
  • Standard Options
  • B
    Ports 1 & 2 — 3/8" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Aluminum
  • B/S
    Ports 1 & 2 — 3/8" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Iron
  • C
    Ports 1 & 2 — 1/2" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Aluminum
  • C/S
    Ports 1 & 2 — 1/2" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Iron
  • D
    Ports 1 & 2 — 3/4" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Iron
  • E
    Ports 1 & 2 — 1" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Aluminum
  • E/S
    Ports 1 & 2 — 1" NPTF; Gage Ports — 1/4" NPTF; Port V — 1/4" NPTF; Iron
  • I
    Ports 1 & 2 — SAE 6; Gage Ports — 1/4" NPTF; Port V — SAE 6; Aluminum
  • I/S
    Ports 1 & 2 — SAE 6; Gage Ports — 1/4" NPTF; Port V — SAE 6; Iron
  • J
    Ports 1 & 2 — SAE 8; Gage Ports — 1/4" NPTF; Port V — SAE 6; Aluminum
  • J/S
    Ports 1 & 2 — SAE 8; Gage Ports — 1/4" NPTF; Port V — SAE 6; Iron
  • K
    Ports 1 & 2 — SAE 10; Gage Ports — 1/4" NPTF; Port V — SAE 6; Aluminum
  • K/S
    Ports 1 & 2 — SAE 10; Gage Ports — 1/4" NPTF; Port V — SAE 6; Iron
  • L
    Ports 1 & 2 — SAE 12; Gage Ports — 1/4" NPTF; Port V — SAE 6; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Gage Ports — 1/4" NPTF; Port V — SAE 6; Iron
  • M
    Ports 1 & 2 — SAE 16; Gage Ports — SAE 6; Port V — SAE 6; Aluminum
  • M/S
    Ports 1 & 2 — SAE 16; Gage Ports — SAE 6; Port V — SAE 6; Iron
  • U
    Ports 1 & 2 — 3/8" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Aluminum
  • U/S
    Ports 1 & 2 — 3/8" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Iron
  • V
    Ports 1 & 2 — 1/2" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Aluminum
  • V/S
    Ports 1 & 2 — 1/2" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Iron
  • X
    Ports 1 & 2 — 1" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Aluminum
  • X/S
    Ports 1 & 2 — 1" BSPP; Gage Ports — 1/4" BSPP; Port V — 1/4" BSPP; Iron
Coil
  • Standard Options
  • No coil
  • 211
    DIN 43650 4 pin (Hirschman) 115 VAC
  • 212
    DIN 43650 4 pin (Hirschman) 12 VDC
  • 212D
    DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
  • 212LX01
    DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
  • 212LX02
    DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
  • 212X01
    DIN 43650-Form A, 12 VDC, with XMD-01 driver
  • 212X02
    DIN 43650-Form A, 12 VDC, with XMD-02 driver
  • 214
    DIN 43650 4 pin (Hirschman) 14 VDC
  • 214D
    DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
  • 214LX01
    DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
  • 214LX02
    DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
  • 214X01
    DIN 43650-Form A, 14 VDC, with XMD-01 driver
  • 214X02
    DIN 43650-Form A, 14 VDC, with XMD-02 driver
  • 223
    DIN 43650 4 pin (Hirschman) 230 VAC
  • 224
    DIN 43650 3 pin (Hirschman) 24 VDC
  • 224D
    DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
  • 224LX01
    DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
  • 224LX02
    DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
  • 224X01
    DIN 43650-Form A, 24 VDC, with XMD-01 driver
  • 224X02
    DIN 43650-Form A, 24 VDC, with XMD-02 driver
  • 228
    DIN 43650 4 pin (Hirschman) 28 VDC
  • 228D
    DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
  • 228LX01
    DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
  • 228LX02
    DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
  • 228X01
    DIN 43650-Form A, 28 VDC, with XMD-01 driver
  • 228X02
    DIN 43650-Form A, 28 VDC, with XMD-02 driver
  • 612
    AMP Junior Timer 12 VDC
  • 614
    AMP Junior Timer 14 VDC
  • 624
    AMP Junior Timer 24 VDC
  • 628
    AMP Junior Timer, 28 VDC
  • 712
    Twin Lead 12 VDC
  • 712D
    Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
  • 714
    Twin Lead 14 VDC
  • 724
    Twin Lead 24 VDC
  • 724D
    Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
  • 728
    Twin Lead 28 VDC
  • 812
    Metri-Pack 12 VDC
  • 814
    Metri-Pack 14 VDC
  • 824
    Metri-Pack 24 VDC
  • 828
    Metri-Pack, 28 VDC
  • 912
    Deutsch DT04-2P 12 VDC
  • 912D
    Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
  • 912LX01
    Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
  • 912LX02
    Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
  • 912X01
    Deutsch DT04-2P, 12 VDC, with XMD-01 driver
  • 912X02
    Deutsch DT04-2P, 12 VDC, with XMD-02 driver
  • 914
    Deutsch DT04-2P 14 VDC
  • 914D
    Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
  • 914LX01
    Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
  • 914LX02
    Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
  • 914X01
    Deutsch DT04-2P, 14 VDC, with XMD-01 driver
  • 914X02
    Deutsch DT04-2P, 14 VDC, with XMD-02 driver
  • 924
    Deutsch DT04-2P 24 VDC
  • 924D
    Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
  • 924LX01
    Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
  • 924LX02
    Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
  • 924X01
    Deutsch DT04-2P, 24 VDC, with XMD-01 driver
  • 924X02
    Deutsch DT04-2P, 24 VDC, with XMD-02 driver
  • 928
    Deutsch DT04-2P 28 VDC
  • 928D
    Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
  • 928LX01
    Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
  • 928LX02
    Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
  • 928X01
    Deutsch DT04-2P, 28 VDC, with XMD-01 driver
  • 928X02
    Deutsch DT04-2P, 28 VDC, with XMD-02 driver
See CAD Files tab below to request images.
Function
Normally Open
Function image

Technical specifications

  • Modifiers
    Ports
    • B, B/S
      Ports 1 & 2: 3/8" NPTF; Gage Ports: 1/4" NPTF; Port V: 1/4" NPTF;
    • C, C/S
      Ports 1 & 2: 1/2" NPTF; Gage Ports: 1/4" NPTF; Port V: 1/4" NPTF;
    • D, D/S
      Ports 1 & 2: 3/4" NPTF; Gage Ports: 1/4" NPTF; Port V: 1/4" NPTF;
    • E, E/S
      Ports 1 & 2: 1" NPTF; Gage Ports: 1/4" NPTF; Port V: 1/4" NPTF;
    • I, I/S
      Ports 1 & 2: SAE 6; Gage Ports: 1/4" NPTF; Port V: SAE 6;
    • J, J/S
      Ports 1 & 2: SAE 8; Gage Ports: 1/4" NPTF; Port V: SAE 6;
    • K, K/S
      Ports 1 & 2: SAE 10; Gage Ports: 1/4" NPTF; Port V: SAE 6;
    • L, L/S
      Ports 1 & 2: SAE 12; Gage Ports: 1/4" NPTF; Port V: SAE 6;
    • M, M/S
      Ports 1 & 2: SAE 16; Gage Ports: SAE 6; Port V: SAE 6;
    • U, U/S
      Ports 1 & 2: 3/8" BSPP; Gage Ports: 1/4" BSPP; Port V: 1/4" BSPP;
    • V, V/S
      Ports 1 & 2: 1/2" BSPP; Gage Ports: 1/4" BSPP; Port V: 1/4" BSPP;
    • W, W/S
      Ports 1 & 2: 3/4" BSPP; Gage Ports: 1/4" BSPP; Port V: 1/4" BSPP;
    • X, X/S
      Ports 1 & 2: 1" BSPP; Gage Ports: 1/4" BSPP; Port V: 1/4" BSPP;
    Back to Top

    This valve assembly provides 2 functions. It provides cross-port relief protection between ports 1 and 2. The solenoid valve vents both relief valves, dropping the pressure to a minimal level. This assembly is available in both normally open and normally closed options. The normally open option means the pressure is at a low level until the solenoid is energized. The normally closed option means the pressure is at a high level until the solenoid is energized.

    • The two ports marked 1 are common as are the two marked 2. The high pressure relief that is physically on the same side as port 1 controls the pressure on port 2 and vice versa.
    • This assembly is well suited to loading and unloading a pump.
    • The nature of a vented relief is that it brings the pressure up in a smooth manner. Unloading is abrupt.
    • Now available with FLeX Series solenoid valves. See CONFIGURATION section, SOLENOID DESIGNATION to specify.
    Back to Top
    • Body Type
      Line mount
    • Capacity
      30 gpm
    • Mounting Hole Diameter
      .42 in.
    • Mounting Hole Depth
      Through
    • Mounting Hole Quantity
      2

    Model CAD Files

    Files not yet avialable. Click below to request them.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top
    • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
    • For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
    Back to Top
    Back to Top

    Keep up with Sun