Search Error
Solutions
Solenoid Operated Ventable Relief

Model

XREXLANFK912

Normally Closed
Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • W
    Hex Wrench Adjustment
  • Y
    Tri-Grip Handknob
  • Additional Options
  • K
    Handknob
  • M
    Capped Screw Adjustment with Lockwire Holes
  • O
    Handknob with Panel Mount
  • Q
    Capped and Lockwired
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
  • Additional Options
  • F
    75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
  • I
    15 - 1500 psi (1 - 105 bar), 1000 psi (70 bar) Standard Setting
  • J
    25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • L
    15 - 800 psi (1 - 55 bar), 400 psi (28 bar) Standard Setting
  • M
    40 - 800 psi (2,8 - 55 bar), 400 psi (28 bar) Standard Setting
  • O
    15 - 400 psi (1 - 28 bar), 200 psi (14 bar) Standard Setting
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
  • R
    15 - 200 psi (1 - 14 bar), 100 psi (7 bar) Standard Setting
  • S
    25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting
  • T
    40 - 200 psi (2,8 - 14 bar), 100 psi (7 bar) Standard Setting
  • U
    60 - 200 psi (4 - 14 bar), 100 psi (7 bar) Standard Setting
  • V
    150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
  • Y
    30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with RVEA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
  • U
    740 Coil-Normally Closed (with RVEA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
Port and Material Designation
  • Standard Options
  • A
    Ports 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • A/S
    Ports 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • B
    Ports 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • B/S
    Ports 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • C
    Ports 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • C/S
    Ports 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • D
    Ports 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • I
    Ports 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • I/S
    Ports 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • J
    Ports 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • J/S
    Ports 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • K
    Ports 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • K/S
    Ports 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • L
    Ports 1 & 2 — SAE 12; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • T
    Ports 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • T/S
    Ports 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • U
    Ports 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • U/S
    Ports 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • V
    Ports 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • V/S
    Ports 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Coil
  • Standard Options
  • No coil
  • 211
    DIN 43650 4 pin (Hirschman) 115 VAC
  • 212
    DIN 43650 4 pin (Hirschman) 12 VDC
  • 212D
    DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
  • 212LX01
    DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
  • 212LX02
    DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
  • 212X01
    DIN 43650-Form A, 12 VDC, with XMD-01 driver
  • 212X02
    DIN 43650-Form A, 12 VDC, with XMD-02 driver
  • 214
    DIN 43650 4 pin (Hirschman) 14 VDC
  • 214D
    DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
  • 214LX01
    DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
  • 214LX02
    DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
  • 214X01
    DIN 43650-Form A, 14 VDC, with XMD-01 driver
  • 214X02
    DIN 43650-Form A, 14 VDC, with XMD-02 driver
  • 223
    DIN 43650 4 pin (Hirschman) 230 VAC
  • 224
    DIN 43650 3 pin (Hirschman) 24 VDC
  • 224D
    DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
  • 224LX01
    DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
  • 224LX02
    DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
  • 224X01
    DIN 43650-Form A, 24 VDC, with XMD-01 driver
  • 224X02
    DIN 43650-Form A, 24 VDC, with XMD-02 driver
  • 228
    DIN 43650 4 pin (Hirschman) 28 VDC
  • 228D
    DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
  • 228LX01
    DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
  • 228LX02
    DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
  • 228X01
    DIN 43650-Form A, 28 VDC, with XMD-01 driver
  • 228X02
    DIN 43650-Form A, 28 VDC, with XMD-02 driver
  • 612
    AMP Junior Timer 12 VDC
  • 614
    AMP Junior Timer 14 VDC
  • 624
    AMP Junior Timer 24 VDC
  • 628
    AMP Junior Timer, 28 VDC
  • 712
    Twin Lead 12 VDC
  • 712D
    Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
  • 714
    Twin Lead 14 VDC
  • 724
    Twin Lead 24 VDC
  • 724D
    Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
  • 728
    Twin Lead 28 VDC
  • 812
    Metri-Pack 12 VDC
  • 814
    Metri-Pack 14 VDC
  • 824
    Metri-Pack 24 VDC
  • 828
    Metri-Pack, 28 VDC
  • 912
    Deutsch DT04-2P 12 VDC
  • 912D
    Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
  • 912LX01
    Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
  • 912LX02
    Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
  • 912X01
    Deutsch DT04-2P, 12 VDC, with XMD-01 driver
  • 912X02
    Deutsch DT04-2P, 12 VDC, with XMD-02 driver
  • 914
    Deutsch DT04-2P 14 VDC
  • 914D
    Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
  • 914LX01
    Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
  • 914LX02
    Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
  • 914X01
    Deutsch DT04-2P, 14 VDC, with XMD-01 driver
  • 914X02
    Deutsch DT04-2P, 14 VDC, with XMD-02 driver
  • 924
    Deutsch DT04-2P 24 VDC
  • 924D
    Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
  • 924LX01
    Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
  • 924LX02
    Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
  • 924X01
    Deutsch DT04-2P, 24 VDC, with XMD-01 driver
  • 924X02
    Deutsch DT04-2P, 24 VDC, with XMD-02 driver
  • 928
    Deutsch DT04-2P 28 VDC
  • 928D
    Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
  • 928LX01
    Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
  • 928LX02
    Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
  • 928X01
    Deutsch DT04-2P, 28 VDC, with XMD-01 driver
  • 928X02
    Deutsch DT04-2P, 28 VDC, with XMD-02 driver
  • JM11BD
    Explosion Proof, Metric (M20 X 1.5), 115 VAC, 180 Degree, CSA and ATEX Certification
  • JM11CD
    Explosion Proof, Metric (M20 X 1.5), 115 VAC, 90 Degree, CSA and ATEX Certification
  • JM12BD
    Explosion Proof, Metric (M20 X 1.5), 12 VDC, 180 Degree, CSA and ATEX Certification
  • JM12CD
    Explosion Proof, Metric (M20 X 1.5), 12 VDC, 90 Degree, CSA and ATEX Certification
  • JM23BD
    Explosion Proof, Metric (M20 X 1.5), 230 VAC, 180 Degree, CSA and ATEX Certification
  • JM23CD
    Explosion Proof, Metric (M20 X 1.5), 230 VAC, 90 Degree, CSA and ATEX Certification
  • JM24BD
    Explosion Proof, Metric (M20 X 1.5), 24 VDC, 180 Degree, CSA and ATEX Certification
  • JM24CD
    Explosion Proof, Metric (M20 X 1.5), 24 VDC, 90 Degree, CSA and ATEX Certification
  • JN11BD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 115 VAC, 180 Degree, CSA and ATEX Certification
  • JN11CD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 115 VAC, 90 Degree, CSA and ATEX Certification
  • JN12BD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 12 VDC, 180 Degree, CSA and ATEX Certification
  • JN12CD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 12 VDC, 90 Degree, CSA and ATEX Certification
  • JN23BD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 230 VAC, 180 Degree, CSA and ATEX Certification
  • JN23CD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 230 VAC, 90 Degree, CSA and ATEX Certification
  • JN24BD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 180 Degree, CSA and ATEX Certification
  • JN24CD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 90 Degree, CSA and ATEX Certification

Model: XREX

Solenoid operated ventable relief assembly

Capacity:

Model

XREXLANFK912

Normally Closed
Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • W
    Hex Wrench Adjustment
  • Y
    Tri-Grip Handknob
  • Additional Options
  • K
    Handknob
  • M
    Capped Screw Adjustment with Lockwire Holes
  • O
    Handknob with Panel Mount
  • Q
    Capped and Lockwired
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
  • Additional Options
  • F
    75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
  • I
    15 - 1500 psi (1 - 105 bar), 1000 psi (70 bar) Standard Setting
  • J
    25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • L
    15 - 800 psi (1 - 55 bar), 400 psi (28 bar) Standard Setting
  • M
    40 - 800 psi (2,8 - 55 bar), 400 psi (28 bar) Standard Setting
  • O
    15 - 400 psi (1 - 28 bar), 200 psi (14 bar) Standard Setting
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
  • R
    15 - 200 psi (1 - 14 bar), 100 psi (7 bar) Standard Setting
  • S
    25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting
  • T
    40 - 200 psi (2,8 - 14 bar), 100 psi (7 bar) Standard Setting
  • U
    60 - 200 psi (4 - 14 bar), 100 psi (7 bar) Standard Setting
  • V
    150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
  • Y
    30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with RVEA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
  • U
    740 Coil-Normally Closed (with RVEA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
Port and Material Designation
  • Standard Options
  • A
    Ports 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • A/S
    Ports 1 & 2 — 1/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • B
    Ports 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • B/S
    Ports 1 & 2 — 3/8" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • C
    Ports 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • C/S
    Ports 1 & 2 — 1/2" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • D
    Ports 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • I
    Ports 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • I/S
    Ports 1 & 2 — SAE 6; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • J
    Ports 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • J/S
    Ports 1 & 2 — SAE 8; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • K
    Ports 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • K/S
    Ports 1 & 2 — SAE 10; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • L
    Ports 1 & 2 — SAE 12; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • T
    Ports 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • T/S
    Ports 1 & 2 — 1/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • U
    Ports 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • U/S
    Ports 1 & 2 — 3/8" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • V
    Ports 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • V/S
    Ports 1 & 2 — 1/2" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Coil
  • Standard Options
  • No coil
  • 211
    DIN 43650 4 pin (Hirschman) 115 VAC
  • 212
    DIN 43650 4 pin (Hirschman) 12 VDC
  • 212D
    DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
  • 212LX01
    DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
  • 212LX02
    DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
  • 212X01
    DIN 43650-Form A, 12 VDC, with XMD-01 driver
  • 212X02
    DIN 43650-Form A, 12 VDC, with XMD-02 driver
  • 214
    DIN 43650 4 pin (Hirschman) 14 VDC
  • 214D
    DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
  • 214LX01
    DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
  • 214LX02
    DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
  • 214X01
    DIN 43650-Form A, 14 VDC, with XMD-01 driver
  • 214X02
    DIN 43650-Form A, 14 VDC, with XMD-02 driver
  • 223
    DIN 43650 4 pin (Hirschman) 230 VAC
  • 224
    DIN 43650 3 pin (Hirschman) 24 VDC
  • 224D
    DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
  • 224LX01
    DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
  • 224LX02
    DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
  • 224X01
    DIN 43650-Form A, 24 VDC, with XMD-01 driver
  • 224X02
    DIN 43650-Form A, 24 VDC, with XMD-02 driver
  • 228
    DIN 43650 4 pin (Hirschman) 28 VDC
  • 228D
    DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
  • 228LX01
    DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
  • 228LX02
    DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
  • 228X01
    DIN 43650-Form A, 28 VDC, with XMD-01 driver
  • 228X02
    DIN 43650-Form A, 28 VDC, with XMD-02 driver
  • 612
    AMP Junior Timer 12 VDC
  • 614
    AMP Junior Timer 14 VDC
  • 624
    AMP Junior Timer 24 VDC
  • 628
    AMP Junior Timer, 28 VDC
  • 712
    Twin Lead 12 VDC
  • 712D
    Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
  • 714
    Twin Lead 14 VDC
  • 724
    Twin Lead 24 VDC
  • 724D
    Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
  • 728
    Twin Lead 28 VDC
  • 812
    Metri-Pack 12 VDC
  • 814
    Metri-Pack 14 VDC
  • 824
    Metri-Pack 24 VDC
  • 828
    Metri-Pack, 28 VDC
  • 912
    Deutsch DT04-2P 12 VDC
  • 912D
    Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
  • 912LX01
    Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
  • 912LX02
    Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
  • 912X01
    Deutsch DT04-2P, 12 VDC, with XMD-01 driver
  • 912X02
    Deutsch DT04-2P, 12 VDC, with XMD-02 driver
  • 914
    Deutsch DT04-2P 14 VDC
  • 914D
    Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
  • 914LX01
    Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
  • 914LX02
    Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
  • 914X01
    Deutsch DT04-2P, 14 VDC, with XMD-01 driver
  • 914X02
    Deutsch DT04-2P, 14 VDC, with XMD-02 driver
  • 924
    Deutsch DT04-2P 24 VDC
  • 924D
    Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
  • 924LX01
    Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
  • 924LX02
    Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
  • 924X01
    Deutsch DT04-2P, 24 VDC, with XMD-01 driver
  • 924X02
    Deutsch DT04-2P, 24 VDC, with XMD-02 driver
  • 928
    Deutsch DT04-2P 28 VDC
  • 928D
    Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
  • 928LX01
    Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
  • 928LX02
    Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
  • 928X01
    Deutsch DT04-2P, 28 VDC, with XMD-01 driver
  • 928X02
    Deutsch DT04-2P, 28 VDC, with XMD-02 driver
  • JM11BD
    Explosion Proof, Metric (M20 X 1.5), 115 VAC, 180 Degree, CSA and ATEX Certification
  • JM11CD
    Explosion Proof, Metric (M20 X 1.5), 115 VAC, 90 Degree, CSA and ATEX Certification
  • JM12BD
    Explosion Proof, Metric (M20 X 1.5), 12 VDC, 180 Degree, CSA and ATEX Certification
  • JM12CD
    Explosion Proof, Metric (M20 X 1.5), 12 VDC, 90 Degree, CSA and ATEX Certification
  • JM23BD
    Explosion Proof, Metric (M20 X 1.5), 230 VAC, 180 Degree, CSA and ATEX Certification
  • JM23CD
    Explosion Proof, Metric (M20 X 1.5), 230 VAC, 90 Degree, CSA and ATEX Certification
  • JM24BD
    Explosion Proof, Metric (M20 X 1.5), 24 VDC, 180 Degree, CSA and ATEX Certification
  • JM24CD
    Explosion Proof, Metric (M20 X 1.5), 24 VDC, 90 Degree, CSA and ATEX Certification
  • JN11BD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 115 VAC, 180 Degree, CSA and ATEX Certification
  • JN11CD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 115 VAC, 90 Degree, CSA and ATEX Certification
  • JN12BD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 12 VDC, 180 Degree, CSA and ATEX Certification
  • JN12CD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 12 VDC, 90 Degree, CSA and ATEX Certification
  • JN23BD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 230 VAC, 180 Degree, CSA and ATEX Certification
  • JN23CD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 230 VAC, 90 Degree, CSA and ATEX Certification
  • JN24BD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 180 Degree, CSA and ATEX Certification
  • JN24CD
    Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 90 Degree, CSA and ATEX Certification
Function
Normally Closed
Function image
Normally Open
Function image

Technical specifications

  • Modifiers
    Ports
    • A, A/S
      Ports 1 & 2: 1/4" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • B, B/S
      Ports 1 & 2: 3/8" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • C, C/S
      Ports 1 & 2: 1/2" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • D, D/S
      Ports 1 & 2: 3/4" NPTF; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • I, I/S
      Ports 1 & 2: SAE 6; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • J, J/S
      Ports 1 & 2: SAE 8; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • K, K/S
      Ports 1 & 2: SAE 10; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • L, L/S
      Ports 1 & 2: SAE 12; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • T, T/S
      Ports 1 & 2: 1/4" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • U, U/S
      Ports 1 & 2: 3/8" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • V, V/S
      Ports 1 & 2: 1/2" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • W, W/S
      Ports 1 & 2: 3/4" BSPP; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    Back to Top

    This valve assembly provides 2 functions. It relieves from pressure (port 1) to tank (port 2) when pressure at port 1 exceeds the setting of the valve. The solenoid control allows the valve to be vented, dropping the pressure to a minimal level. This assembly is available in both normally open option and normally closed option. The normally open option means the pressure is at a low level until the solenoid is energized. The normally closed option means the pressure is at a high level until the solenoid is energized.

    • Now available with FLeX Series solenoid valves. See CONFIGURATION section, SOLENOID DESIGNATION to specify.
    • This assembly is well suited to loading and unloading a pump.
    • The nature of a vented relief is that it brings the pressure up in a smooth manner. Unloading is abrupt.
    Back to Top
    • Body Type
      Line mount
    • Capacity
      30 gpm

    Model CAD Files

    Click the link of the file format you want to download.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top
    • When configured with metric porting, mounting hole thread is M10 x 1.5-6H.
    • For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
    • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
    Back to Top
    Back to Top