Search Error
Solutions
Solenoid Operated Ventable Relief

Model

XRGXLANFL912

Normally Closed
Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • K
    Handknob
  • M
    Capped Screw Adjustment with Lockwire Holes
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • Additional Options
  • F
    75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
  • J
    25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • Y
    30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with RVGA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
  • U
    740 Coil-Normally Closed (with RVGA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
Port and Material Designation
  • Standard Options
  • 4
    Ports 1 & 2 — 1" Code 62; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • 4/M
    Ports 1 & 2 — 1" Code 62; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • 4/S
    Ports 1 & 2 — 1" Code 62; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • 4/T
    Ports 1 & 2 — 1" Code 62; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • 5
    Ports 1 & 2 — 1 1/4 in. Code 62; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • 5/M
    Ports 1 & 2 — 1 1/4 in. Code 62; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • 5/S
    Ports 1 & 2 — 1 1/4 in. Code 62; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • 5/T
    Ports 1 & 2 — 1 1/4 in. Code 62; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • D
    Ports 1 & 2 — 3/4" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • E
    Ports 1 & 2 — 1" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • E/S
    Ports 1 & 2 — 1" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • F
    Ports 1 & 2 — 1 1/4" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • F/S
    Ports 1 & 2 — 1 1/4" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • L
    Ports 1 & 2 — SAE 12; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • M
    Ports 1 & 2 — SAE 16; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • M/S
    Ports 1 & 2 — SAE 16; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • N
    Ports 1 & 2 — SAE 20; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • N/S
    Ports 1 & 2 — SAE 20; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • P
    Ports 1 & 2 — 1" Code 61; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • P/M
    Ports 1 & 2 — 1" Code 61; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • P/S
    Ports 1 & 2 — 1" Code 61; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • P/T
    Ports 1 & 2 — 1" Code 61; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • Q
    Ports 1 & 2 — 1 1/4" Code 61 ; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • Q/M
    Ports 1 & 2 — 1 1/4" Code 61 ; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • Q/S
    Ports 1 & 2 — 1 1/4" Code 61 ; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • Q/T
    Ports 1 & 2 — 1 1/4" Code 61 ; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • X
    Ports 1 & 2 — 1" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • X/S
    Ports 1 & 2 — 1" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • Y
    Ports 1 & 2 — 1 1/4" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • Y/S
    Ports 1 & 2 — 1 1/4" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Coil
  • Standard Options
  • No coil
  • 211
    DIN 43650 4 pin (Hirschman) 115 VAC
  • 212
    DIN 43650 4 pin (Hirschman) 12 VDC
  • 212D
    DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
  • 212LX01
    DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
  • 212LX02
    DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
  • 212X01
    DIN 43650-Form A, 12 VDC, with XMD-01 driver
  • 212X02
    DIN 43650-Form A, 12 VDC, with XMD-02 driver
  • 214
    DIN 43650 4 pin (Hirschman) 14 VDC
  • 214D
    DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
  • 214LX01
    DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
  • 214LX02
    DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
  • 214X01
    DIN 43650-Form A, 14 VDC, with XMD-01 driver
  • 214X02
    DIN 43650-Form A, 14 VDC, with XMD-02 driver
  • 223
    DIN 43650 4 pin (Hirschman) 230 VAC
  • 224
    DIN 43650 3 pin (Hirschman) 24 VDC
  • 224D
    DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
  • 224LX01
    DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
  • 224LX02
    DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
  • 224X01
    DIN 43650-Form A, 24 VDC, with XMD-01 driver
  • 224X02
    DIN 43650-Form A, 24 VDC, with XMD-02 driver
  • 228
    DIN 43650 4 pin (Hirschman) 28 VDC
  • 228D
    DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
  • 228LX01
    DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
  • 228LX02
    DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
  • 228X01
    DIN 43650-Form A, 28 VDC, with XMD-01 driver
  • 228X02
    DIN 43650-Form A, 28 VDC, with XMD-02 driver
  • 612
    AMP Junior Timer 12 VDC
  • 614
    AMP Junior Timer 14 VDC
  • 624
    AMP Junior Timer 24 VDC
  • 628
    AMP Junior Timer, 28 VDC
  • 712
    Twin Lead 12 VDC
  • 712D
    Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
  • 714
    Twin Lead 14 VDC
  • 724
    Twin Lead 24 VDC
  • 724D
    Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
  • 728
    Twin Lead 28 VDC
  • 812
    Metri-Pack 12 VDC
  • 814
    Metri-Pack 14 VDC
  • 824
    Metri-Pack 24 VDC
  • 828
    Metri-Pack, 28 VDC
  • 912
    Deutsch DT04-2P 12 VDC
  • 912D
    Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
  • 912LX01
    Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
  • 912LX02
    Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
  • 912X01
    Deutsch DT04-2P, 12 VDC, with XMD-01 driver
  • 912X02
    Deutsch DT04-2P, 12 VDC, with XMD-02 driver
  • 914
    Deutsch DT04-2P 14 VDC
  • 914D
    Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
  • 914LX01
    Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
  • 914LX02
    Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
  • 914X01
    Deutsch DT04-2P, 14 VDC, with XMD-01 driver
  • 914X02
    Deutsch DT04-2P, 14 VDC, with XMD-02 driver
  • 924
    Deutsch DT04-2P 24 VDC
  • 924D
    Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
  • 924LX01
    Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
  • 924LX02
    Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
  • 924X01
    Deutsch DT04-2P, 24 VDC, with XMD-01 driver
  • 924X02
    Deutsch DT04-2P, 24 VDC, with XMD-02 driver
  • 928
    Deutsch DT04-2P 28 VDC
  • 928D
    Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
  • 928LX01
    Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
  • 928LX02
    Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
  • 928X01
    Deutsch DT04-2P, 28 VDC, with XMD-01 driver
  • 928X02
    Deutsch DT04-2P, 28 VDC, with XMD-02 driver

Model: XRGX

Solenoid operated ventable relief assembly

Capacity:

Model

XRGXLANFL912

Normally Closed
Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • K
    Handknob
  • M
    Capped Screw Adjustment with Lockwire Holes
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • Additional Options
  • F
    75 - 6000 psi (5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
  • J
    25 - 1500 psi (1,7 - 105 bar), 1000 psi (70 bar) Standard Setting
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • Y
    30 - 4500 psi (2 - 315 bar), 1000 psi (70 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Solenoid Designation
  • Standard Options
  • F
    740 Coil-Normally Open (with RVGA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
  • U
    740 Coil-Normally Closed (with RVGA primary cartridge, Ventable, pilot-operated, balanced piston relief valve)
Port and Material Designation
  • Standard Options
  • 4
    Ports 1 & 2 — 1" Code 62; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • 4/M
    Ports 1 & 2 — 1" Code 62; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • 4/S
    Ports 1 & 2 — 1" Code 62; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • 4/T
    Ports 1 & 2 — 1" Code 62; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • 5
    Ports 1 & 2 — 1 1/4 in. Code 62; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • 5/M
    Ports 1 & 2 — 1 1/4 in. Code 62; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • 5/S
    Ports 1 & 2 — 1 1/4 in. Code 62; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • 5/T
    Ports 1 & 2 — 1 1/4 in. Code 62; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • D
    Ports 1 & 2 — 3/4" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • E
    Ports 1 & 2 — 1" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • E/S
    Ports 1 & 2 — 1" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • F
    Ports 1 & 2 — 1 1/4" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • F/S
    Ports 1 & 2 — 1 1/4" NPTF; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • L
    Ports 1 & 2 — SAE 12; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • M
    Ports 1 & 2 — SAE 16; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • M/S
    Ports 1 & 2 — SAE 16; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • N
    Ports 1 & 2 — SAE 20; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • N/S
    Ports 1 & 2 — SAE 20; Gage Port — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • P
    Ports 1 & 2 — 1" Code 61; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • P/M
    Ports 1 & 2 — 1" Code 61; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • P/S
    Ports 1 & 2 — 1" Code 61; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • P/T
    Ports 1 & 2 — 1" Code 61; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • Q
    Ports 1 & 2 — 1 1/4" Code 61 ; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • Q/M
    Ports 1 & 2 — 1 1/4" Code 61 ; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • Q/S
    Ports 1 & 2 — 1 1/4" Code 61 ; Port G — 1/4" NPTF; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • Q/T
    Ports 1 & 2 — 1 1/4" Code 61 ; Port G — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • X
    Ports 1 & 2 — 1" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • X/S
    Ports 1 & 2 — 1" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • Y
    Ports 1 & 2 — 1 1/4" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • Y/S
    Ports 1 & 2 — 1 1/4" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Coil
  • Standard Options
  • No coil
  • 211
    DIN 43650 4 pin (Hirschman) 115 VAC
  • 212
    DIN 43650 4 pin (Hirschman) 12 VDC
  • 212D
    DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
  • 212LX01
    DIN 43650-Form A, 12 VDC, low power, with XMD-01 driver
  • 212LX02
    DIN 43650-Form A, 12 VDC, low power, with XMD-02 driver
  • 212X01
    DIN 43650-Form A, 12 VDC, with XMD-01 driver
  • 212X02
    DIN 43650-Form A, 12 VDC, with XMD-02 driver
  • 214
    DIN 43650 4 pin (Hirschman) 14 VDC
  • 214D
    DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
  • 214LX01
    DIN 43650-Form A, 14 VDC, low power, with XMD-01 driver
  • 214LX02
    DIN 43650-Form A, 14 VDC, low power, with XMD-02 driver
  • 214X01
    DIN 43650-Form A, 14 VDC, with XMD-01 driver
  • 214X02
    DIN 43650-Form A, 14 VDC, with XMD-02 driver
  • 223
    DIN 43650 4 pin (Hirschman) 230 VAC
  • 224
    DIN 43650 3 pin (Hirschman) 24 VDC
  • 224D
    DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
  • 224LX01
    DIN 43650-Form A, 24 VDC, low power, with XMD-01 driver
  • 224LX02
    DIN 43650-Form A, 24 VDC, low power, with XMD-02 driver
  • 224X01
    DIN 43650-Form A, 24 VDC, with XMD-01 driver
  • 224X02
    DIN 43650-Form A, 24 VDC, with XMD-02 driver
  • 228
    DIN 43650 4 pin (Hirschman) 28 VDC
  • 228D
    DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
  • 228LX01
    DIN 43650-Form A, 28 VDC, low power, with XMD-01 driver
  • 228LX02
    DIN 43650-Form A, 28 VDC, low power, with XMD-02 driver
  • 228X01
    DIN 43650-Form A, 28 VDC, with XMD-01 driver
  • 228X02
    DIN 43650-Form A, 28 VDC, with XMD-02 driver
  • 612
    AMP Junior Timer 12 VDC
  • 614
    AMP Junior Timer 14 VDC
  • 624
    AMP Junior Timer 24 VDC
  • 628
    AMP Junior Timer, 28 VDC
  • 712
    Twin Lead 12 VDC
  • 712D
    Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
  • 714
    Twin Lead 14 VDC
  • 724
    Twin Lead 24 VDC
  • 724D
    Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
  • 728
    Twin Lead 28 VDC
  • 812
    Metri-Pack 12 VDC
  • 814
    Metri-Pack 14 VDC
  • 824
    Metri-Pack 24 VDC
  • 828
    Metri-Pack, 28 VDC
  • 912
    Deutsch DT04-2P 12 VDC
  • 912D
    Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
  • 912LX01
    Deutsch DT04-2P, 12 VDC, low power, with XMD-01 driver
  • 912LX02
    Deutsch DT04-2P, 12 VDC, low power, with XMD-02 driver
  • 912X01
    Deutsch DT04-2P, 12 VDC, with XMD-01 driver
  • 912X02
    Deutsch DT04-2P, 12 VDC, with XMD-02 driver
  • 914
    Deutsch DT04-2P 14 VDC
  • 914D
    Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
  • 914LX01
    Deutsch DT04-2P, 14 VDC, low power, with XMD-01 driver
  • 914LX02
    Deutsch DT04-2P, 14 VDC, low power, with XMD-02 driver
  • 914X01
    Deutsch DT04-2P, 14 VDC, with XMD-01 driver
  • 914X02
    Deutsch DT04-2P, 14 VDC, with XMD-02 driver
  • 924
    Deutsch DT04-2P 24 VDC
  • 924D
    Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
  • 924LX01
    Deutsch DT04-2P, 24 VDC, low power, with XMD-01 driver
  • 924LX02
    Deutsch DT04-2P, 24 VDC, low power, with XMD-02 driver
  • 924X01
    Deutsch DT04-2P, 24 VDC, with XMD-01 driver
  • 924X02
    Deutsch DT04-2P, 24 VDC, with XMD-02 driver
  • 928
    Deutsch DT04-2P 28 VDC
  • 928D
    Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
  • 928LX01
    Deutsch DT04-2P, 28 VDC, low power, with XMD-01 driver
  • 928LX02
    Deutsch DT04-2P, 28 VDC, low power, with XMD-02 driver
  • 928X01
    Deutsch DT04-2P, 28 VDC, with XMD-01 driver
  • 928X02
    Deutsch DT04-2P, 28 VDC, with XMD-02 driver
Function
Normally Closed
Function image
Normally Open
Function image

Technical specifications

  • Modifiers
    Ports
    • 4, 4/S
      Ports 1 & 2: 1" Code 62; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • 4/M, 4/T
      Ports 1 & 2: 1" Code 62; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • 5, 5/S
      Ports 1 & 2: 1-1/4" C62; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • 5/M, 5/T
      Ports 1 & 2: 1-1/4" C62; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • D, D/S
      Ports 1 & 2: 3/4" NPTF; Gage Port: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • E, E/S
      Ports 1 & 2: 1" NPTF; Gage Port: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • F, F/S
      Ports 1 & 2: 1 1/4" NPTF; Gage Port: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • L, L/S
      Ports 1 & 2: SAE 12; Gage Port: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • M, M/S
      Ports 1 & 2: SAE 16; Gage Port: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • N, N/S
      Ports 1 & 2: SAE 20; Gage Port: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • P, P/S
      Ports 1 & 2: 1" Code 61; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • P/M, P/T
      Ports 1 & 2: 1" Code 61; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • Q, Q/S
      Ports 1 & 2: 1 1/4" Code 61 ; Port G: 1/4" NPTF; Mtg Holes: .375 - 16UNC x .62 DP;
    • Q/M, Q/T
      Ports 1 & 2: 1 1/4" Code 61 ; Port G: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • W, W/S
      Ports 1 & 2: 3/4" BSPP; Gage Port: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • X, X/S
      Ports 1 & 2: 1" BSPP; Gage Port: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • Y, Y/S
      Ports 1 & 2: 1 1/4" BSPP; Gage Port: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    Back to Top

    This valve assembly provides 2 functions. It relieves from pressure (port 1) to tank (port 2) when pressure at port 1 exceeds the setting of the valve. The solenoid control allows the valve to be vented, dropping the pressure to a minimal level. This assembly is available in both normally open option and normally closed option. The normally open option means the pressure is at a low level until the solenoid is energized. The normally closed option means the pressure is at a high level until the solenoid is energized.

    • This assembly is well suited to loading and unloading a pump.
    • The nature of a vented relief is that it brings the pressure up in a smooth manner. Unloading is abrupt.
    • Now available with FLeX Series solenoid valves. See CONFIGURATION section, SOLENOID DESIGNATION to specify.
    Back to Top
    • Body Type
      Line mount
    • Capacity
      60 gpm
    • Mounting Hole Quantity
      2

    Model CAD Files

    Click the link of the file format you want to download.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top
    • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
    • For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
    Back to Top
    Back to Top