Model: XRQK
Solenoid operated ventable relief assembly
Capacity:
Model
XRQKLANFM912
Normally Closed
Function
Normally Closed
Normally Open
Technical specifications
Modifiers
Ports
- 5, 5/SPorts 1 & 2: 1-1/4" C62; Port G: 1/4" NPTF; Mtg Holes: .47 DIA (11,9 mm) THRU;
- 5/M, 5/TPorts 1 & 2: 1-1/4" C62; Port G: 1/4" BSPP; Mtg Holes: .42 DIA (10,7 mm) THRU;
- E, E/SPort 1: 1 1/4" Code 61 ; Port 2: 1" NPTF; Port G: 1/4" NPTF; Mtg Holes: .47 DIA (11,9 mm) THRU;
- M, M/SPort 1: 1 1/4" Code 61 ; Port 2: SAE 16; Port G: 1/4" NPTF; Mtg Holes: .47 DIA (11,9 mm) THRU;
- Q, Q/SPorts 1 & 2: 1 1/4" Code 61 ; Port G: 1/4" NPTF; Mtg Holes: .47 DIA (11,9 mm) THRU;
- Q/M, Q/TPorts 1 & 2: 1 1/4" Code 61 ; Port G: 1/4" BSPP; Mtg Holes: .42 DIA (10,7 mm) THRU;
- X, X/SPort 1: 1 1/4" Code 61 ; Port 2: 1" BSPP; Port G: 1/4" BSPP; Mtg Holes: .42 DIA (10,7 mm) THRU;
This valve assembly provides 2 functions. It relieves from pressure (port 1) to tank (port 2) when pressure at port 1 exceeds the setting of the valve. The solenoid control allows the valve to be vented, dropping the pressure to a minimal level. This assembly is available in both normally open option and normally closed option. The normally open option means the pressure is at a low level until the solenoid is energized. The normally closed option means the pressure is at a high level until the solenoid is energized.
- This assembly is well suited to loading and unloading a pump.
- The nature of a vented relief is that it brings the pressure up in a smooth manner. Unloading is abrupt.
- Now available with FLeX Series solenoid valves. See CONFIGURATION section, SOLENOID DESIGNATION to specify.
- Body TypeLine mount
- Interface1.25 SAE C61
- Capacity60 gpm
- Body FeaturesSandwich mount through port
Why doesn't Sun anodize their aluminum bodies?
How big is a drop of hydraulic oil?
Direct acting or pilot operated - what do I use?
- Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
- For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
Highlights
Technical Tips
Technical Information
- PartDescriptionQuantity
- 500-001-222*O-Ring1