Model: YNEK
Rapid advance and feed flow control assembly
Capacity:
Model
YNEKLANBA
Function
Meter in A
![Function image](https://cmsimages.sunhydraulics.com/sym-ynek-mia.png)
Meter out B
![Function image](https://cmsimages.sunhydraulics.com/sym-ynek-mob.png)
Technical specifications
This assembly consists of a needle valve which is a fully-adjustable orifice used to regulate flow. It is infinitely adjustable from fully closed up to the maximum orifice diameter. It is not pressure-compensated. It may be used as a flow control or as a shutoff valve. The rapid or feed rate is selected by a vented, pilot-to-open check valve with an external pilot port.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- A balanced adjustment mechanism allows for easy adjustment even at high pressures.
- Because needle valves are non-compensating devices, the fixed orifice size will regulate flow through the valve in proportion to the square root of the pressure differential across ports 1 and 2.
- Body TypeSandwich
- InterfaceISO 05
- Capacity30 gpm
- Body FeaturesMeter in on A or meter out on B
- Control Flow Range0 - 12 gpm
- Seal Plate Included (see notes)Yes
- Stack Height2.49 in.
Why doesn't Sun anodize their aluminum bodies?
How big is a drop of hydraulic oil?
Direct acting or pilot operated - what do I use?
- Stack height value in technical data table includes seal retainer plate.
- For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
- Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
Highlights
Technical Tips
Technical Information
- PartDescriptionQuantity
- 500-001-014*O-Ring5
- 700-001*Seal Plate1