Search Error
Solutions
Sequence

Model

YSEHLANBA

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • F
    Hex Head Screw with Locknut
  • L
    Standard Screw Adjustment
  • W
    Hex Wrench Adjustment
  • Y
    Tri-Grip Handknob
  • Additional Options
  • J
    Capped Screw Adjustment
  • K
    Handknob
  • M
    Capped Screw Adjustment with Lockwire Holes
  • O
    Handknob with Panel Mount
  • Q
    Capped and Lockwired
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
  • Additional Options
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Primary Cartridge
  • Standard Options
  • B
    B (with RSDC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • B
    B (with RSDC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
Port and Material Designation
  • Standard Options
  • A
    External Port — 3/8" NPTF; Aluminum
  • A/S
    External Port — 3/8" NPTF; Iron

Model: YSEH

ISO 05 sandwich manifold, A or B sequence to external port with reverse flow check assembly

Capacity:

Model

YSEHLANBA

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • F
    Hex Head Screw with Locknut
  • L
    Standard Screw Adjustment
  • W
    Hex Wrench Adjustment
  • Y
    Tri-Grip Handknob
  • Additional Options
  • J
    Capped Screw Adjustment
  • K
    Handknob
  • M
    Capped Screw Adjustment with Lockwire Holes
  • O
    Handknob with Panel Mount
  • Q
    Capped and Lockwired
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
  • Additional Options
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Primary Cartridge
  • Standard Options
  • B
    B (with RSDC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • B
    B (with RSDC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
Port and Material Designation
  • Standard Options
  • A
    External Port — 3/8" NPTF; Aluminum
  • A/S
    External Port — 3/8" NPTF; Iron
Function
Function image

Technical specifications

  • Modifiers
    Ports
    • A, A/S
      External Port: 3/8" NPTF;
    Back to Top

    This assembly consists of a pilot-operated, balanced piston sequence valve that will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3). These valves are insensitive to back pressure at port 2 (sequence), up to the valve setting. They may be used to regulate pressure in place of 2-port relief valves if there is pressure in the return line. Additionally the assembly also provides a reverse flow check valve.

    • Should not be used in load holding applications.
    • Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
    Back to Top
    • Body Type
      Sandwich
    • Interface
      ISO 05
    • Capacity
      10 gpm
    • Body Features
      A or B to External Port with Free Flow Check
    • Seal Plate Included (see notes)
      Yes
    • Stack Height
      2.49 in.

    Model CAD Files

    Files not yet avialable. Click below to request them.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top
    • Stack height value in technical data table includes seal retainer plate.
    • For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
    • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
    Back to Top