Search Error
Solutions
Sequence

Model

YSHALANAN

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Y
    Tri-Grip Handknob
  • Additional Options
  • K
    Handknob
  • Q
    Capped and Lockwired
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Range Letter(s) of Subordinate Cartridge
  • Standard Options
  • A
    4 psi (0,3 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • B
    15 psi (1 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • C
    30 psi (2 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • D
    50 psi (3,5 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • E
    75 psi (5 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • F
    100 psi (7 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • Z
    1 psi (0,07 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • A
    4 psi (0,3 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • B
    15 psi (1 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • C
    30 psi (2 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • D
    50 psi (3,5 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • E
    75 psi (5 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • F
    100 psi (7 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • Z
    1 psi (0,07 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
Port and Material Designation
  • Standard Options
  • D
    Ports 1 & 2 — 3/4" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Iron
  • E
    Ports 1 & 2 — 1" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Aluminum
  • E/S
    Ports 1 & 2 — 1" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Iron
  • F
    Ports 1 & 2 — 1 1/4" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Aluminum
  • F/S
    Ports 1 & 2 — 1 1/4" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Iron
  • L
    Ports 1 & 2 — SAE 12; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • M
    Ports 1 & 2 — SAE 16; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • M/S
    Ports 1 & 2 — SAE 16; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • N
    Ports 1 & 2 — SAE 20; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • N/S
    Ports 1 & 2 — SAE 20; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • P
    Ports 1 & 2 — 1" Code 61; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • P/M
    Ports 1 & 2 — 1" Code 61; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Metric Aluminum
  • P/S
    Ports 1 & 2 — 1" Code 61; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • P/T
    Ports 1 & 2 — 1" Code 61; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Metric Iron
  • Q
    Ports 1 & 2 — 1 1/4" Code 61 ; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • Q/M
    Ports 1 & 2 — 1 1/4" Code 61 ; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Metric Aluminum
  • Q/S
    Ports 1 & 2 — 1 1/4" Code 61 ; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • Q/T
    Ports 1 & 2 — 1 1/4" Code 61 ; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Metric Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Iron
  • X
    Ports 1 & 2 — 1" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Aluminum
  • X/S
    Ports 1 & 2 — 1" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Iron
  • Y
    Ports 1 & 2 — 1 1/4" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Aluminum
  • Y/S
    Ports 1 & 2 — 1 1/4" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Iron

Model: YSHA

Sequence assembly with reverse flow check

Capacity:

Model

YSHALANAN

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Y
    Tri-Grip Handknob
  • Additional Options
  • K
    Handknob
  • Q
    Capped and Lockwired
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Range Letter(s) of Subordinate Cartridge
  • Standard Options
  • A
    4 psi (0,3 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • B
    15 psi (1 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • C
    30 psi (2 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • D
    50 psi (3,5 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • E
    75 psi (5 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • F
    100 psi (7 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • Z
    1 psi (0,07 bar) (with RSHC primary cartridge, Pilot-operated, balanced piston sequence valve)
  • A
    4 psi (0,3 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • B
    15 psi (1 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • C
    30 psi (2 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • D
    50 psi (3,5 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • E
    75 psi (5 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • F
    100 psi (7 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
  • Z
    1 psi (0,07 bar) (with RSHC8 primary cartridge, Pilot-operated, balanced piston sequence main stage with integral T-8A control cavity)
Port and Material Designation
  • Standard Options
  • D
    Ports 1 & 2 — 3/4" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Aluminum
  • D/S
    Ports 1 & 2 — 3/4" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Iron
  • E
    Ports 1 & 2 — 1" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Aluminum
  • E/S
    Ports 1 & 2 — 1" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Iron
  • F
    Ports 1 & 2 — 1 1/4" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Aluminum
  • F/S
    Ports 1 & 2 — 1 1/4" NPTF; Port 3 — 1/4" NPTF; Gage Port — 1/4" NPTF; Iron
  • L
    Ports 1 & 2 — SAE 12; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • M
    Ports 1 & 2 — SAE 16; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • M/S
    Ports 1 & 2 — SAE 16; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • N
    Ports 1 & 2 — SAE 20; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • N/S
    Ports 1 & 2 — SAE 20; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • P
    Ports 1 & 2 — 1" Code 61; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • P/M
    Ports 1 & 2 — 1" Code 61; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Metric Aluminum
  • P/S
    Ports 1 & 2 — 1" Code 61; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • P/T
    Ports 1 & 2 — 1" Code 61; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Metric Iron
  • Q
    Ports 1 & 2 — 1 1/4" Code 61 ; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Aluminum
  • Q/M
    Ports 1 & 2 — 1 1/4" Code 61 ; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Metric Aluminum
  • Q/S
    Ports 1 & 2 — 1 1/4" Code 61 ; Port 3 — SAE 6; Gage Port — 1/4" NPTF; Iron
  • Q/T
    Ports 1 & 2 — 1 1/4" Code 61 ; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Metric Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Iron
  • X
    Ports 1 & 2 — 1" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Aluminum
  • X/S
    Ports 1 & 2 — 1" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Iron
  • Y
    Ports 1 & 2 — 1 1/4" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Aluminum
  • Y/S
    Ports 1 & 2 — 1 1/4" BSPP; Port 3 — 1/4" BSPP; Gage Port — 1/4" BSPP; Iron
Function
Function image

Technical specifications

  • Modifiers
    Ports
    • D, D/S
      Ports 1 & 2: 3/4" NPTF; Port 3: 1/4" NPTF; Gage Port: 1/4" NPTF;
    • E, E/S
      Ports 1 & 2: 1" NPTF; Port 3: 1/4" NPTF; Gage Port: 1/4" NPTF;
    • F, F/S
      Ports 1 & 2: 1 1/4" NPTF; Port 3: 1/4" NPTF; Gage Port: 1/4" NPTF;
    • L, L/S
      Ports 1 & 2: SAE 12; Port 3: SAE 6; Gage Port: 1/4" NPTF;
    • M, M/S
      Ports 1 & 2: SAE 16; Port 3: SAE 6; Gage Port: 1/4" NPTF;
    • N, N/S
      Ports 1 & 2: SAE 20; Port 3: SAE 6; Gage Port: 1/4" NPTF;
    • P, P/S
      Ports 1 & 2: 1" Code 61; Port 3: SAE 6; Gage Port: 1/4" NPTF;
    • P/M, P/T
      Ports 1 & 2: 1" Code 61; Port 3: 1/4" BSPP; Gage Port: 1/4" BSPP;
    • Q, Q/S
      Ports 1 & 2: 1 1/4" Code 61 ; Port 3: SAE 6; Gage Port: 1/4" NPTF;
    • Q/M, Q/T
      Ports 1 & 2: 1 1/4" Code 61 ; Port 3: 1/4" BSPP; Gage Port: 1/4" BSPP;
    • W, W/S
      Ports 1 & 2: 3/4" BSPP; Port 3: 1/4" BSPP; Gage Port: 1/4" BSPP;
    • X, X/S
      Ports 1 & 2: 1" BSPP; Port 3: 1/4" BSPP; Gage Port: 1/4" BSPP;
    • Y, Y/S
      Ports 1 & 2: 1 1/4" BSPP; Port 3: 1/4" BSPP; Gage Port: 1/4" BSPP;
    Back to Top

    This assembly consists of a pilot-operated, balanced piston sequence valve that will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3). These valves are insensitive to back pressure at port 2 (sequence), up to the valve setting. They may be used to regulate pressure in place of 2-port relief valves if there is pressure in the return line. Additionally the assembly also provides a reverse flow check valve.

    Back to Top
    • Body Type
      Line mount
    • Capacity
      60 gpm
    • Mounting Hole Diameter
      .41 in.
    • Mounting Hole Depth
      Through
    • Mounting Hole Quantity
      2

    Model CAD Files

    Files not yet avialable. Click below to request them.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top
    • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
    • For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
    Back to Top