Search Error
Solutions
Cushion Lock

Model

YCENLINAL

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • R
    Lockwired Screw Adjustment
Functional Setting Range
  • Standard Options
  • I
    400 - 1500 psi w/25 psi Check (28 - 105 bar w/ 1,7 bar Check), 1000 psi (70 bar) Standard Setting
  • Additional Options
  • A
    1000 - 4000 psi w/4 psi Check (70 - 280 bar w/ 0,3 bar Check), 3000 psi (210 bar) Standard Setting
  • B
    400 - 1500 psi w/4 psi Check (28 - 105 bar w/ 0,3 bar Check), 1000 psi (70 bar) Standard Setting
  • H
    1000 - 4000 psi w/25 psi Check (70 - 280 bar w/ 1,7 bar Check), 3000 psi (210 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Pilot Ratio (4th Letter) of Primary Cartridge
  • Standard Options
  • A
    3:1 (with CBEA primary cartridge, 3:1 pilot ratio, standard capacity counterbalance valve)
  • G
    4.5:1 (with CBEG primary cartridge, 4.5:1 pilot ratio, standard capacity counterbalance valve)
  • H
    10:1 (with CBEH primary cartridge, 10:1 pilot ratio, standard capacity counterbalance valve)
  • A
    3:1 (with CBEAX primary cartridge, Fixed setting, 3:1 pilot ratio, standard capacity counterbalance valve)
  • G
    4.5:1 (with CBEGX primary cartridge, Fixed setting, 4.5:1 pilot ratio, standard capacity counterbalance valve)
  • H
    10:1 (with CBEHX primary cartridge, )
Port and Material Designation
  • Standard Options
  • C
    Ports C1, C2, V1, V2 — 1/2" NPTF; Port T — 1/2" NPTF; Aluminum
  • C/S
    Ports C1, C2, V1, V2 — 1/2" NPTF; Port T — 1/2" NPTF; Iron
  • D
    Ports C1, C2, V1, V2 — 3/4" NPTF; Port T — 3/4" NPTF; Aluminum
  • D/S
    Ports C1, C2, V1, V2 — 3/4" NPTF; Port T — 3/4" NPTF; Iron
  • K
    Ports C1, C2, V1, V2 — SAE 10; Port T — SAE 12; Aluminum
  • K/S
    Ports C1, C2, V1, V2 — SAE 10; Port T — SAE 12; Iron
  • L
    Ports C1, C2, V1, V2 — SAE 12; Port T — SAE 12; Aluminum
  • L/S
    Ports C1, C2, V1, V2 — SAE 12; Port T — SAE 12; Iron
  • V
    Ports C1, C2, V1, V2 — 1/2" BSPP; Port T — 3/4" BSPP; Aluminum
  • V/S
    Ports C1, C2, V1, V2 — 1/2" BSPP; Port T — 3/4" BSPP; Iron
  • W
    Ports C1, C2, V1, V2 — 3/4" BSPP; Port T — 3/4" BSPP; Aluminum
  • W/S
    Ports C1, C2, V1, V2 — 3/4" BSPP; Port T — 3/4" BSPP; Iron

Model: YCEN

Dual cushion lockassembly

Capacity:

Model

YCENLINAL

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • R
    Lockwired Screw Adjustment
Functional Setting Range
  • Standard Options
  • I
    400 - 1500 psi w/25 psi Check (28 - 105 bar w/ 1,7 bar Check), 1000 psi (70 bar) Standard Setting
  • Additional Options
  • A
    1000 - 4000 psi w/4 psi Check (70 - 280 bar w/ 0,3 bar Check), 3000 psi (210 bar) Standard Setting
  • B
    400 - 1500 psi w/4 psi Check (28 - 105 bar w/ 0,3 bar Check), 1000 psi (70 bar) Standard Setting
  • H
    1000 - 4000 psi w/25 psi Check (70 - 280 bar w/ 1,7 bar Check), 3000 psi (210 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Pilot Ratio (4th Letter) of Primary Cartridge
  • Standard Options
  • A
    3:1 (with CBEA primary cartridge, 3:1 pilot ratio, standard capacity counterbalance valve)
  • G
    4.5:1 (with CBEG primary cartridge, 4.5:1 pilot ratio, standard capacity counterbalance valve)
  • H
    10:1 (with CBEH primary cartridge, 10:1 pilot ratio, standard capacity counterbalance valve)
  • A
    3:1 (with CBEAX primary cartridge, Fixed setting, 3:1 pilot ratio, standard capacity counterbalance valve)
  • G
    4.5:1 (with CBEGX primary cartridge, Fixed setting, 4.5:1 pilot ratio, standard capacity counterbalance valve)
  • H
    10:1 (with CBEHX primary cartridge, )
Port and Material Designation
  • Standard Options
  • C
    Ports C1, C2, V1, V2 — 1/2" NPTF; Port T — 1/2" NPTF; Aluminum
  • C/S
    Ports C1, C2, V1, V2 — 1/2" NPTF; Port T — 1/2" NPTF; Iron
  • D
    Ports C1, C2, V1, V2 — 3/4" NPTF; Port T — 3/4" NPTF; Aluminum
  • D/S
    Ports C1, C2, V1, V2 — 3/4" NPTF; Port T — 3/4" NPTF; Iron
  • K
    Ports C1, C2, V1, V2 — SAE 10; Port T — SAE 12; Aluminum
  • K/S
    Ports C1, C2, V1, V2 — SAE 10; Port T — SAE 12; Iron
  • L
    Ports C1, C2, V1, V2 — SAE 12; Port T — SAE 12; Aluminum
  • L/S
    Ports C1, C2, V1, V2 — SAE 12; Port T — SAE 12; Iron
  • V
    Ports C1, C2, V1, V2 — 1/2" BSPP; Port T — 3/4" BSPP; Aluminum
  • V/S
    Ports C1, C2, V1, V2 — 1/2" BSPP; Port T — 3/4" BSPP; Iron
  • W
    Ports C1, C2, V1, V2 — 3/4" BSPP; Port T — 3/4" BSPP; Aluminum
  • W/S
    Ports C1, C2, V1, V2 — 3/4" BSPP; Port T — 3/4" BSPP; Iron
Function
Function image

Technical specifications

  • Modifiers
    Ports
    • C, C/S
      Ports C1,C2,V1,V2: 1/2" NPTF; Port T: 1/2" NPTF;
    • D, D/S
      Ports C1,C2,V1,V2: 3/4" NPTF; Port T: 3/4" NPTF;
    • K, K/S
      Ports C1,C2,V1,V2: SAE 10; Port T: SAE 12;
    • L, L/S
      Ports C1,C2,V1,V2: SAE 12; Port T: SAE 12;
    • V, V/S
      Ports C1,C2,V1,V2: 1/2" BSPP; Port T: 3/4" BSPP;
    • W, W/S
      Ports C1,C2,V1,V2: 3/4" BSPP; Port T: 3/4" BSPP;
    Back to Top

    This valve assembly provides overrunning load-control and load-port relief protection and includes a load sense shuttle for brake release. Connecting the T port is optional and will supply make-up oil and may flush hot dirty oil out of the actuator. Oil coming out of the actuator may return to tank through either port T or the directional valve.

    Back to Top
    • Capacity
      30 gpm
    • Mounting Hole Diameter
      .40 in.
    • Mounting Hole Depth
      Through
    • Mounting Hole Quantity
      2

    Model CAD Files

    Files not yet avialable. Click below to request them.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top
    • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
    • For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the Included Components tab.
    Back to Top