12 VDC coil with Deutsch DT04-2P connector with TVS Diode

• Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
• A TVS surge suppression diode is built into DC coils. Nominal breakdown voltage: 68V. Model code 1.5 KE68CA Steady state power dissipation @ 75°C is 6.5 W and peak pulse dissipation is 1500 W for 1 ms, nonrepetitive.
• Power cable with mating connector is required and is not included with product.
• The Deutsch DT04-2P connector satisfies the requirements of thermal shock tests. In this test, the coil is energized to achieve its stabilized temperature and then immediately immersed into ice cold water. This process is repeated 5 times, after which, the insulation resistance of the coils should not fall below 10 megohms.
• The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
• For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
• IP rating is dependent on the coil connector and the mating connector used.
• The external steel shell is plated with clear zinc trivalent.
• RoHS compliant. Restricted materials less than 0.1% total by weight.

Model CAD Files

Click the link of the file format you want to download.

770912.prt

770912.stp

Back to Top

What models can this kit be used with?

• 991723001 2-pin Deutsch connector kit (gray)
• 991723002 2-pin Deutsch connector kit (black)
• DFCA 2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
• DFCB 2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
• DFDA 2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
• DFDB 2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
• DFEA 2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
• DFEB 2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
• DFFA 2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
• DFFB 2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
• DMDA 3-way, solenoid-operated directional spool valve
• DMDAS 3-way, soft shift, solenoid-operated directional spool valve
• DNCA 4-way, 2-position, solenoid-operated directional spool valve with closed transition
• DNDA 4-way, 2-position, solenoid-operated directional spool valve
• DNDAS 4-way, 2-position, soft shift, solenoid-operated directional spool valve
• DNDC 4-way, 3-position, solenoid-operated directional spool valve
• DNDY 2-position, 6-way, solenoid-operated directional spool valve
• DNDYS 2-position, 6-way, soft shift, solenoid-operated directional spool valve
• DTCA 2-way, direct-acting, solenoid-operated directional blocking poppet valve with overlap
• FMDA Electro-proportional 3-way flow control valve, meter in
• FMDB Electro-proportional 3-way flow control valve, meter in
• FPCC Electro-proportional flow control valve - normally closed
• FPCH Electro-proportional flow control valve - normally open
• FPFK Pilot-operated, normally closed, electro-proportional throttle with reverse flow check
• FPHK Pilot-operated, normally closed, electro-proportional throttle with reverse flow check
• HDDA 2-way, solenoid-operated directional poppet valve - after check
• PRDL Electro-proportional, direct-acting, pressure reducing/relieving valve with open transition
• PRDM Electro-proportional, direct-acting, pressure reducing/relieving valve with open transition - high pressure setting with no command
• PRDN Electro-proportional, direct-acting, pressure reducing/relieving valve, high pressure setting with no command
• PRDP Electro-proportional, direct-acting, pressure reducing/relieving valve
• PSDL Electro-proportional, direct-acting, pressure reducing/relieving valve with open transition and drain to port 4
• PSDP Electro-proportional, direct-acting, pressure reducing/relieving valve with drain to port 4
• RBAN Electro-proportional relief valve - pilot capacity, high pressure setting with no command
• RBAP Electro-proportional relief valve - pilot capacity
Back to Top