Search Error
Solutions
Detector de presión en el acumulador, descargador de bomba

Modelo

XQCGLANBK

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • K
    manilla
Adjustment Range
  • Additional Options
  • A
    1000 - 3000 psi (70 - 210 bar), 1000 psi (70 bar) Standard Setting
  • B
    500 - 1500 psi (35 - 105 bar), 500 psi (35 bar) Standard Setting
  • C
    2000 - 5000 psi (140 - 350 bar), 2000 psi (140 bar) Standard Setting
  • D
    250 - 800 psi (18 - 55 bar), 250 psi (18 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Pilot Ratio (4th Letter) of Primary Cartridge
  • Standard Options
  • A
    15% (with QCDA primary cartridge, 15%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
  • B
    20% (with QCDB primary cartridge, 20%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
  • C
    30% (with QCDC primary cartridge, 30%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
  • D
    50% (with QCDD primary cartridge, 50%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
  • E
    10% (with QCDE primary cartridge, 10%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
Port and Material Designation
  • Standard Options
  • C
    Ports P, T, SYS 1, SYS 2 — 1/2" NPTF; Port G — 1/4" NPTF; Ports D & AUX — 3/8" NPTF; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Aluminum
  • C/S
    Ports P, T, SYS 1, SYS 2 — 1/2" NPTF; Port G — 1/4" NPTF; Ports D & AUX — 3/8" NPTF; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Iron
  • K
    Ports P, T, SYS 1, SYS 2 — SAE 10; Port G — SAE 4; Ports D & AUX — SAE 6; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Aluminum
  • K/S
    Ports P, T, SYS 1, SYS 2 — SAE 10; Port G — SAE 4; Ports D & AUX — SAE 6; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Iron
  • V
    Ports P, T, SYS 1, SYS 2 — 1/2" BSPP; Port G — 1/4" BSPP; Ports D & AUX — 3/8" BSPP; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Aluminum
  • V/S
    Ports P, T, SYS 1, SYS 2 — 1/2" BSPP; Port G — 1/4" BSPP; Ports D & AUX — 3/8" BSPP; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Iron

Model: XQCG

Detector de presión en el acumulador, descargador de bomba ensamblaje

Capacity:

Modelo

XQCGLANBK

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • K
    manilla
Adjustment Range
  • Additional Options
  • A
    1000 - 3000 psi (70 - 210 bar), 1000 psi (70 bar) Standard Setting
  • B
    500 - 1500 psi (35 - 105 bar), 500 psi (35 bar) Standard Setting
  • C
    2000 - 5000 psi (140 - 350 bar), 2000 psi (140 bar) Standard Setting
  • D
    250 - 800 psi (18 - 55 bar), 250 psi (18 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Pilot Ratio (4th Letter) of Primary Cartridge
  • Standard Options
  • A
    15% (with QCDA primary cartridge, 15%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
  • B
    20% (with QCDB primary cartridge, 20%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
  • C
    30% (with QCDC primary cartridge, 30%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
  • D
    50% (with QCDD primary cartridge, 50%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
  • E
    10% (with QCDE primary cartridge, 10%, detector de presión en el acumulador, descargador de bomba válvula con anti-retorno - capacidad de pilotaje)
Port and Material Designation
  • Standard Options
  • C
    Ports P, T, SYS 1, SYS 2 — 1/2" NPTF; Port G — 1/4" NPTF; Ports D & AUX — 3/8" NPTF; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Aluminum
  • C/S
    Ports P, T, SYS 1, SYS 2 — 1/2" NPTF; Port G — 1/4" NPTF; Ports D & AUX — 3/8" NPTF; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Iron
  • K
    Ports P, T, SYS 1, SYS 2 — SAE 10; Port G — SAE 4; Ports D & AUX — SAE 6; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Aluminum
  • K/S
    Ports P, T, SYS 1, SYS 2 — SAE 10; Port G — SAE 4; Ports D & AUX — SAE 6; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Iron
  • V
    Ports P, T, SYS 1, SYS 2 — 1/2" BSPP; Port G — 1/4" BSPP; Ports D & AUX — 3/8" BSPP; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Aluminum
  • V/S
    Ports P, T, SYS 1, SYS 2 — 1/2" BSPP; Port G — 1/4" BSPP; Ports D & AUX — 3/8" BSPP; Mounting Holes — .41 DIA (10,4 mm) THROUGH; Iron
Función
Function image

Especificaciones técnicas

  • Modifiers
    Ports
    • C, C/S
      Ports P, T, SYS 1, SYS 2: 1/2" NPTF; Port G: 1/4" NPTF; Ports D & AUX: 3/8" NPTF; Mtg Holes: .41 DIA (10,4 mm) THRU;
    • K, K/S
      Ports P, T, SYS 1, SYS 2: SAE 10; Port G: SAE 4; Ports D & AUX: SAE 6; Mtg Holes: .41 DIA (10,4 mm) THRU;
    • V, V/S
      Ports P, T, SYS 1, SYS 2: 1/2" BSPP; Port G: 1/4" BSPP; Ports D & AUX: 3/8" BSPP; Mtg Holes: .41 DIA (10,4 mm) THRU;
    Back to Top
    • Body Type
      Line mount
    • Capacity
      10 gpm

    Model CAD Files

    Files not yet avialable. Click below to request them.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top