Search Error
Solutions
Hydrostatic Transmission Flushing Circuit

Modelo

XRJBLANA6

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • M
    Capped Screw Adjustment with Lockwire Holes
  • Q
    Capped and Lockwired
Adjustment Range
  • Standard Options
  • W
    800 - 4500 psi (55 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Additional Options
  • A
    500 - 3000 psi (35 - 210 bar), 1000 psi (70 bar) Standard Setting
  • B
    300 - 1500 psi (20 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    1000 - 6000 psi (70 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    200 - 800 psi (14 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    100 - 400 psi (7 - 28 bar), 200 psi (14 bar) Standard Setting
  • S
    50 - 200 psi (3,5 - 14 bar), 100 psi (7 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Primary Cartridge
  • Standard Options
  • A
    A (with RDJA primary cartridge, Acción-directa alivio válvula )
Port and Material Designation
  • Standard Options
  • 6
    Ports 1 & 2 — 1 1/2" Code 62 ; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Aluminum
  • 6/M
    Ports 1 & 2 — 1 1/2" Code 62 ; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Aluminum
  • 6/S
    Ports 1 & 2 — 1 1/2" Code 62 ; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Iron
  • 6/T
    Ports 1 & 2 — 1 1/2" Code 62 ; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Iron
  • 8
    Ports 1 & 2 — 2" Code 62; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Aluminum
  • 8/M
    Ports 1 & 2 — 2" Code 62; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Aluminum
  • 8/S
    Ports 1 & 2 — 2" Code 62; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Iron
  • 8/T
    Ports 1 & 2 — 2" Code 62; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Iron
  • R
    Ports 1 & 2 — 1 1/2" Code 61; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Aluminum
  • R/M
    Ports 1 & 2 — 1 1/2" Code 61; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Aluminum
  • R/S
    Ports 1 & 2 — 1 1/2" Code 61; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Iron
  • R/T
    Ports 1 & 2 — 1 1/2" Code 61; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Iron
  • S
    Ports 1 & 2 — 2" Code 61; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Aluminum
  • S/M
    Ports 1 & 2 — 2" Code 61; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Aluminum
  • S/S
    Ports 1 & 2 — 2" Code 61; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Iron
  • S/T
    Ports 1 & 2 — 2" Code 61; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Iron

Model: XRJB

Transmisión hidrostática limpiar el sistema ensamblaje con alivio a puertos-en-cruz

Capacity:

Modelo

XRJBLANA6

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • M
    Capped Screw Adjustment with Lockwire Holes
  • Q
    Capped and Lockwired
Adjustment Range
  • Standard Options
  • W
    800 - 4500 psi (55 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Additional Options
  • A
    500 - 3000 psi (35 - 210 bar), 1000 psi (70 bar) Standard Setting
  • B
    300 - 1500 psi (20 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    1000 - 6000 psi (70 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    200 - 800 psi (14 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    100 - 400 psi (7 - 28 bar), 200 psi (14 bar) Standard Setting
  • S
    50 - 200 psi (3,5 - 14 bar), 100 psi (7 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Primary Cartridge
  • Standard Options
  • A
    A (with RDJA primary cartridge, Acción-directa alivio válvula )
Port and Material Designation
  • Standard Options
  • 6
    Ports 1 & 2 — 1 1/2" Code 62 ; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Aluminum
  • 6/M
    Ports 1 & 2 — 1 1/2" Code 62 ; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Aluminum
  • 6/S
    Ports 1 & 2 — 1 1/2" Code 62 ; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Iron
  • 6/T
    Ports 1 & 2 — 1 1/2" Code 62 ; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Iron
  • 8
    Ports 1 & 2 — 2" Code 62; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Aluminum
  • 8/M
    Ports 1 & 2 — 2" Code 62; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Aluminum
  • 8/S
    Ports 1 & 2 — 2" Code 62; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Iron
  • 8/T
    Ports 1 & 2 — 2" Code 62; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Iron
  • R
    Ports 1 & 2 — 1 1/2" Code 61; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Aluminum
  • R/M
    Ports 1 & 2 — 1 1/2" Code 61; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Aluminum
  • R/S
    Ports 1 & 2 — 1 1/2" Code 61; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Iron
  • R/T
    Ports 1 & 2 — 1 1/2" Code 61; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Iron
  • S
    Ports 1 & 2 — 2" Code 61; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Aluminum
  • S/M
    Ports 1 & 2 — 2" Code 61; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Aluminum
  • S/S
    Ports 1 & 2 — 2" Code 61; Port T — SAE 16; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .88 DP; Iron
  • S/T
    Ports 1 & 2 — 2" Code 61; Port T — 1" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .88 DP; Metric Iron
Función
Function image

Especificaciones técnicas

  • Modifiers
    Ports
    • 6, 6/S
      Ports 1 & 2: 1 1/2" Code 62 ; Port T: SAE 16; Gage Ports: SAE 6; Mtg Holes: .375 - 16UNC x .88 DP;
    • 6/M, 6/T
      Ports 1 & 2: 1 1/2" Code 62 ; Port T: 1" BSPP; Gage Ports: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .88 DP;
    • 8, 8/S
      Ports 1 & 2: 2" Code 62; Port T: SAE 16; Gage Ports: SAE 6; Mtg Holes: .375 - 16UNC x .88 DP;
    • 8/M, 8/T
      Ports 1 & 2: 2" Code 62; Port T: 1" BSPP; Gage Ports: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .88 DP;
    • R, R/S
      Ports 1 & 2: 1 1/2 in. Code 61; Port T: SAE 16; Gage Ports: SAE 6; Mtg Holes: .375 - 16UNC x .88 DP;
    • R/M, R/T
      Ports 1 & 2: 1 1/2 in. Code 61; Port T: 1" BSPP; Gage Ports: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .88 DP;
    • S, S/S
      Ports 1 & 2: 2" Code 61; Port T: SAE 16; Gage Ports: SAE 6; Mtg Holes: .375 - 16UNC x .88 DP;
    • S/M, S/T
      Ports 1 & 2: 2" Code 61; Port T: 1" BSPP; Gage Ports: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .88 DP;
    Back to Top
    • Body Type
      Line mount
    • Capacity
      120 gpm
    • Mounting Hole Quantity
      4

    Model CAD Files

    Click the link of the file format you want to download.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top