Search Error
Solutions
Selectoras de aceite caliente y alivio

Modelo

XRDCLANHL

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • F
    Hex Head Screw with Locknut
  • L
    Standard Screw Adjustment
  • W
    Hex Wrench Adjustment
  • Y
    manilla de tres agarres
  • Additional Options
  • J
    Capped Screw Adjustment
  • K
    manilla
  • M
    Capped Screw Adjustment with Lockwire Holes
  • O
    Handknob with Panel Mount
  • Q
    Capped and Lockwired
  • R
    Lockwired Screw Adjustment
  • T
    Tamper Proof - Factory Set
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
  • Additional Options
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
  • V
    150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Range Letter(s) of Subordinate Cartridge
  • Standard Options
  • A
    200 psi (14 bar) (with RPEC primary cartridge, Pilot-operated, pistón balanceado alivio válvula )
  • E
    75 psi (5 bar) (with RPEC primary cartridge, Pilot-operated, pistón balanceado alivio válvula )
  • G
    150 psi (10,5 bar) (with RPEC primary cartridge, Pilot-operated, pistón balanceado alivio válvula )
  • H
    200 psi (14 bar) (with RPEC primary cartridge, Pilot-operated, pistón balanceado alivio válvula )
  • A
    200 psi (14 bar) (with RPEC8 primary cartridge, Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral )
  • E
    75 psi (5 bar) (with RPEC8 primary cartridge, Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral )
  • G
    150 psi (10,5 bar) (with RPEC8 primary cartridge, Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral )
  • H
    200 psi (14 bar) (with RPEC8 primary cartridge, Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral )
Port and Material Designation
  • Standard Options
  • 3
    Ports 1 & 2 — 3/4" Code 62; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • 3/M
    Ports 1 & 2 — 3/4" Code 62; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • 3/S
    Ports 1 & 2 — 3/4" Code 62; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • 3/T
    Ports 1 & 2 — 3/4" Code 62; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • K
    Ports 1 & 2 — SAE 10; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • K/S
    Ports 1 & 2 — SAE 10; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • L
    Ports 1 & 2 — SAE 12; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • O
    Ports 1 & 2 — 3/4" Code 61; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • O/M
    Ports 1 & 2 — 3/4" Code 61; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • O/S
    Ports 1 & 2 — 3/4" Code 61; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • O/T
    Ports 1 & 2 — 3/4" Code 61; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • V
    Ports 1 & 2 — 1/2" BSPP; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • V/S
    Ports 1 & 2 — 1/2" BSPP; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron

Model: XRDC

Selectoras de aceite caliente y alivio ensamblaje

Capacity:

Modelo

XRDCLANHL

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • F
    Hex Head Screw with Locknut
  • L
    Standard Screw Adjustment
  • W
    Hex Wrench Adjustment
  • Y
    manilla de tres agarres
  • Additional Options
  • J
    Capped Screw Adjustment
  • K
    manilla
  • M
    Capped Screw Adjustment with Lockwire Holes
  • O
    Handknob with Panel Mount
  • Q
    Capped and Lockwired
  • R
    Lockwired Screw Adjustment
  • T
    Tamper Proof - Factory Set
Adjustment Range
  • Preferred Options
  • A
    100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting
  • W
    150 - 4500 psi (10,5 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Standard Options
  • B
    50 - 1500 psi (3,5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    150 - 6000 psi (10,5 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    25 - 800 psi (1,7 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting
  • N
    60 - 800 psi (4 - 55 bar), 400 psi (28 bar) Standard Setting
  • Q
    60 - 400 psi (4 - 28 bar), 200 psi (14 bar) Standard Setting
  • Additional Options
  • G
    60 - 3000 psi (4 - 210 bar), 1000 psi (70 bar) Standard Setting
  • H
    30 - 3000 psi (2 - 210 bar), 1000 psi (70 bar) Standard Setting
  • K
    75 - 1500 psi (5 - 105 bar), 1000 psi (70 bar) Standard Setting
  • P
    40 - 400 psi (2,8 - 28 bar), 200 psi (14 bar) Standard Setting
  • V
    150 - 800 psi (10,5 - 55 bar), 400 psi (28 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Range Letter(s) of Subordinate Cartridge
  • Standard Options
  • A
    200 psi (14 bar) (with RPEC primary cartridge, Pilot-operated, pistón balanceado alivio válvula )
  • E
    75 psi (5 bar) (with RPEC primary cartridge, Pilot-operated, pistón balanceado alivio válvula )
  • G
    150 psi (10,5 bar) (with RPEC primary cartridge, Pilot-operated, pistón balanceado alivio válvula )
  • H
    200 psi (14 bar) (with RPEC primary cartridge, Pilot-operated, pistón balanceado alivio válvula )
  • A
    200 psi (14 bar) (with RPEC8 primary cartridge, Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral )
  • E
    75 psi (5 bar) (with RPEC8 primary cartridge, Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral )
  • G
    150 psi (10,5 bar) (with RPEC8 primary cartridge, Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral )
  • H
    200 psi (14 bar) (with RPEC8 primary cartridge, Pilot-operated, pistón balanceado alivio módulo principal con cavidad de control T-8A integral )
Port and Material Designation
  • Standard Options
  • 3
    Ports 1 & 2 — 3/4" Code 62; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • 3/M
    Ports 1 & 2 — 3/4" Code 62; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • 3/S
    Ports 1 & 2 — 3/4" Code 62; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • 3/T
    Ports 1 & 2 — 3/4" Code 62; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • K
    Ports 1 & 2 — SAE 10; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • K/S
    Ports 1 & 2 — SAE 10; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • L
    Ports 1 & 2 — SAE 12; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • L/S
    Ports 1 & 2 — SAE 12; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • O
    Ports 1 & 2 — 3/4" Code 61; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • O/M
    Ports 1 & 2 — 3/4" Code 61; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • O/S
    Ports 1 & 2 — 3/4" Code 61; Port T — SAE 8; Gage Port — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • O/T
    Ports 1 & 2 — 3/4" Code 61; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • V
    Ports 1 & 2 — 1/2" BSPP; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • V/S
    Ports 1 & 2 — 1/2" BSPP; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
  • W
    Ports 1 & 2 — 3/4" BSPP; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • W/S
    Ports 1 & 2 — 3/4" BSPP; Port T — 3/8" BSPP; Gage Port — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Función
Function image

Especificaciones técnicas

  • Modifiers
    Ports
    • 3, 3/S
      Ports 1 & 2: 3/4" Code 62; Port T: SAE 8; Gage Port: SAE 6; Mtg Holes: .375 - 16UNC x .62 DP;
    • 3/M, 3/T
      Ports 1 & 2: 3/4" Code 62; Port T: 3/8" BSPP; Gage Port: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • K, K/S
      Ports 1 & 2: SAE 10; Port T: SAE 8; Gage Port: SAE 6; Mtg Holes: .375 - 16UNC x .62 DP;
    • L, L/S
      Ports 1 & 2: SAE 12; Port T: SAE 8; Gage Port: SAE 6; Mtg Holes: .375 - 16UNC x .62 DP;
    • O, O/S
      Ports 1 & 2: 3/4" Code 61; Port T: SAE 8; Gage Port: SAE 6; Mtg Holes: .375 - 16UNC x .62 DP;
    • O/M, O/T
      Ports 1 & 2: 3/4" Code 61; Port T: 3/8" BSPP; Gage Port: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • V, V/S
      Ports 1 & 2: 1/2" BSPP; Port T: 3/8" BSPP; Gage Port: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • W, W/S
      Ports 1 & 2: 3/4" BSPP; Port T: 3/8" BSPP; Gage Port: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    Back to Top
    • Body Type
      Line mount
    • Interface
      None
    • Capacity
      10 gpm
    • Mounting Hole Quantity
      4

    Model CAD Files

    Click the link of the file format you want to download.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top