Search Error
Solutions
Hydrostatic Transmission Flushing Circuit

Modelo

XRFBLANAM

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • K
    manilla
  • Q
    Capped and Lockwired
Adjustment Range
  • Standard Options
  • W
    800 - 4500 psi (55 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Additional Options
  • A
    500 - 3000 psi (35 - 210 bar), 1000 psi (70 bar) Standard Setting
  • B
    300 - 1500 psi (20 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    1000 - 6000 psi (70 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    200 - 800 psi (14 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    100 - 400 psi (7 - 28 bar), 200 psi (14 bar) Standard Setting
  • S
    50 - 200 psi (3,5 - 14 bar), 100 psi (7 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Primary Cartridge
  • Standard Options
  • A
    A (with RDFA primary cartridge, Acción-directa alivio válvula )
  • A
    A (with RDFA3 primary cartridge, No-ajustable acción-directa alivio válvula )
Port and Material Designation
  • Standard Options
  • 4
    Ports 1 & 2 — 1" Code 62; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .75 DP; Aluminum
  • 4/M
    Ports 1 & 2 — 1" Code 62; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .75 DP; Metric Aluminum
  • 4/S
    Ports 1 & 2 — 1" Code 62; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .75 DP; Iron
  • 4/T
    Ports 1 & 2 — 1" Code 62; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .75 DP; Metric Iron
  • M
    Ports 1 & 2 — SAE 16; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • M/S
    Ports 1 & 2 — SAE 16; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • P
    Ports 1 & 2 — 1" Code 61; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • P/M
    Ports 1 & 2 — 1" Code 61; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • P/S
    Ports 1 & 2 — 1" Code 61; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • P/T
    Ports 1 & 2 — 1" Code 61; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • X
    Ports 1 & 2 — 1" BSPP; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • X/S
    Ports 1 & 2 — 1" BSPP; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron

Model: XRFB

Transmisión hidrostática limpiar el sistema ensamblaje con alivio a puertos-en-cruz

Capacity:

Modelo

XRFBLANAM

Control
  • Standard Options
  • C
    Tamper Resistant - Factory Set
  • L
    Standard Screw Adjustment
  • Additional Options
  • K
    manilla
  • Q
    Capped and Lockwired
Adjustment Range
  • Standard Options
  • W
    800 - 4500 psi (55 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Additional Options
  • A
    500 - 3000 psi (35 - 210 bar), 1000 psi (70 bar) Standard Setting
  • B
    300 - 1500 psi (20 - 105 bar), 1000 psi (70 bar) Standard Setting
  • C
    1000 - 6000 psi (70 - 420 bar), 1000 psi (70 bar) Standard Setting
  • D
    200 - 800 psi (14 - 55 bar), 400 psi (28 bar) Standard Setting
  • E
    100 - 400 psi (7 - 28 bar), 200 psi (14 bar) Standard Setting
  • S
    50 - 200 psi (3,5 - 14 bar), 100 psi (7 bar) Standard Setting
Seal Material
  • Standard Options
  • N
    Buna-N
  • V
    Viton
Primary Cartridge
  • Standard Options
  • A
    A (with RDFA primary cartridge, Acción-directa alivio válvula )
  • A
    A (with RDFA3 primary cartridge, No-ajustable acción-directa alivio válvula )
Port and Material Designation
  • Standard Options
  • 4
    Ports 1 & 2 — 1" Code 62; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .75 DP; Aluminum
  • 4/M
    Ports 1 & 2 — 1" Code 62; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .75 DP; Metric Aluminum
  • 4/S
    Ports 1 & 2 — 1" Code 62; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .75 DP; Iron
  • 4/T
    Ports 1 & 2 — 1" Code 62; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .75 DP; Metric Iron
  • M
    Ports 1 & 2 — SAE 16; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • M/S
    Ports 1 & 2 — SAE 16; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • P
    Ports 1 & 2 — 1" Code 61; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Aluminum
  • P/M
    Ports 1 & 2 — 1" Code 61; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Aluminum
  • P/S
    Ports 1 & 2 — 1" Code 61; Port T — SAE 10; Gage Ports — SAE 6; Mounting Holes — .375 - 16UNC x .62 DP; Iron
  • P/T
    Ports 1 & 2 — 1" Code 61; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Metric Iron
  • X
    Ports 1 & 2 — 1" BSPP; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Aluminum
  • X/S
    Ports 1 & 2 — 1" BSPP; Port T — 1/2" BSPP; Gage Ports — 1/4" BSPP; Mounting Holes — M10 x 1.5-6H x .62 DP; Iron
Función
Function image

Especificaciones técnicas

  • Modifiers
    Ports
    • 4, 4/S
      Ports 1 & 2: 1" Code 62; Port T: SAE 10; Gage Ports: SAE 6; Mtg Holes: .375 - 16UNC x .75 DP;
    • 4/M, 4/T
      Ports 1 & 2: 1" Code 62; Port T: 1/2" BSPP; Gage Ports: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .75 DP;
    • M, M/S
      Ports 1 & 2: SAE 16; Port T: SAE 10; Gage Ports: SAE 6; Mtg Holes: .375 - 16UNC x .62 DP;
    • P, P/S
      Ports 1 & 2: 1" Code 61; Port T: SAE 10; Gage Ports: SAE 6; Mtg Holes: .375 - 16UNC x .62 DP;
    • P/M, P/T
      Ports 1 & 2: 1" Code 61; Port T: 1/2" BSPP; Gage Ports: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    • X, X/S
      Ports 1 & 2: 1" BSPP; Port T: 1/2" BSPP; Gage Ports: 1/4" BSPP; Mtg Holes: M10 x 1.5-6H x .62 DP;
    Back to Top
    • Body Type
      Line mount
    • Capacity
      20 gpm
    • Mounting Hole Quantity
      4

    Model CAD Files

    Files not yet avialable. Click below to request them.

    Back to Top
    • Why doesn't Sun anodize their aluminum bodies?
    • How big is a drop of hydraulic oil?  
    • Direct acting or pilot operated - what do I use?
      • Back to Top