740 Series, 28 VDC, low-power coil with Deutsch DT04-2P connector without TVS Diode

• Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
• Power cable with mating connector is required and is not included with the coil.
• The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
• Coil is fully RoHS compliant. Restricted materials less than 0.1% total by weight.
• The external steel shell is zinc-nickel plated and provides 1000-hour salt fog protection.
• For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
• This coil does not include a transient voltage suppression (TVS) diode and should only be used when surge suppression is included elsewhere in the electrical system. If no surge suppression is included in the circuit, the coil version with TVS diode should be used.
• IP rating for this coil is IP69K.
• This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.

Model CAD Files

Click the link of the file format you want to download.

740928L.prt

740928L.stp

Back to Top

What models can this kit be used with?

• 991711300 XMD Series, 12-pin Deutsch prototype cable, single-output - 3M
• 991711600 XMD Series, 12-pin Deutsch prototype cable, single-output - 6M
• 991712300 XMD Series, 12-pin Deutsch prototype cable, double-output - 3M
• 991712600 XMD Series, 12-pin Deutsch prototype cable, double-output - 6M
• 991713030 XMD Series, 2-pin Deutsch prototype cable - 30CM
• 991713060 XMD Series, 2-pin Deutsch prototype cable - 60CM
• 991717 FLeX Series, adapter cable - 2-pin Deutsch to Metri-Pack, Series 150-2M
• 991718 FLeX Series, adapter cable - 2-pin Deutsch to AMP Junior Timer
• 991719 FLeX Series, adapter cable - 2-pin Deutsch to twin leads
• 991723001 2-pin Deutsch connector kit (gray)
• 991723002 2-pin Deutsch connector kit (black)
• 991740002 XMD Series, low-power coil clip kit
• DBAF 3-way solenoid-operated directional spool valve - pilot capacity (740 Series)
• DBAFS 3-way, soft shift, solenoid-operated directional spool valve - pilot capacity (740 Series)
• DFBD FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar)
• DFBE FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar)
• DMBD FLeX Series 3-way, solenoid-operated directional spool valve - 3000 psi (210 bar)
• DNBD FLeX Series 4-way, 2-position, solenoid-operated directional spool valve - 3000 psi (210 bar)
• DTAF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve
• DTAFS FLeX Series 2-way, soft shift, solenoid-operated directional poppet valve - pilot capacity
• DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve
• FPBD FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar)
• FPBE FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar)
• FPBM FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar)
• FPBN FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar)
• RPEI Electro-proportional relief valve - high pressure setting with no command
• XMD-01 Configurable single-output driver used with proportional and solenoid-operated switching valves
• XMD-02 Configurable double-output driver used with proportional and solenoid-operated switching valves
Back to Top